Samsung Level Box Mini Battery Replacement Repair Guide

Difficulty

Easy

Steps

3

Time Required

                          5 minutes            

Sections

1

• Battery
• 3 steps

Flags

0

• BackSamsung Level Box Mini

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Using a plastic opening tool, go around the edges of the rubber bottom. Insert the same tool under the edge of the rubber and swivel side to side. Continue moving it forward while peeling the plastic off with the precision tweezers.

Using a plastic opening tool, go around the edges of the rubber bottom. Insert the same tool under the edge of the rubber and swivel side to side. Continue moving it forward while peeling the plastic off with the precision tweezers.

1024

Step 2

• Remove the six 4.5 mm Philips #1 screws from the bottom plate using the Screwdriver J00. Take off the bottom plate.

Remove the six 4.5 mm Philips #1 screws from the bottom plate using the Screwdriver J00. Take off the bottom plate.

Step 3

• Using the plastic opening tool, remove the batteries from the device.

Using the plastic opening tool, remove the batteries from the device.

To reassemble your device, follow all the instructions in the reverse order. Use adhesive to stick the rubber back onto the bottom of the device.

Cancel: I did not complete this guide.

                                                                                      8 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    dylan weiss                     

Member since: 02/16/2017

134 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       USF Tampa, Team 1-4, Kass Spring 2017                        

                                                  Member of USF Tampa, Team 1-4, Kass Spring 2017 



                    USFT-KASS-S17S1G4                     


                                            5 Members                     


                                            3 Guides authored                     

dslotman5 - Apr 5, 2019

Reply

Did all above but still wont switch on..batt are ok and power gets to the battery points…what could be wrong…

faraz siddiqui - Oct 22, 2022

Reply

I want to replace pcb of this device how to find it??

I want to replace PCB of this device suggest me where to find?