Difficulty
Moderate
Steps
9
Time Required
15 - 30 minutes
Sections
2
- Removing Samsung ML2510 Back Panel
- 3 steps
- Motor
- 6 steps
Flags
Incorrect Tools
Help make this guide better by using the correct tools in images and/or text.
Better Introduction
Improve this guide by completing or revising its introduction.
BackSamsung ML-2510
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Removing Samsung ML2510 Back Panel
- Remove the top hinged panel by taking out the pins at the bottom of this panel.
Remove the top hinged panel by taking out the pins at the bottom of this panel.
1024
Step 2
- Using a Phillips #2 screwdriver, remove the four screws on the back of the printer.
Using a Phillips #2 screwdriver, remove the four screws on the back of the printer.
Step 3
- Gently lift the top panel while simultaneously pulling off the back panel.
- Before pulling out the back panel entirely, make sure to remove the rear cooling fan from its slot.
Gently lift the top panel while simultaneously pulling off the back panel.
Before pulling out the back panel entirely, make sure to remove the rear cooling fan from its slot.
Step 4
Motor
- Remove the front panel by gently moving the holes on the panel, one at a time, from the pegs attached to the main body of the printer.
Remove the front panel by gently moving the holes on the panel, one at a time, from the pegs attached to the main body of the printer.
Step 5
- Use a Phillips #2 screwdriver to remove the two, 1", Phillips, PH#2 screws on the front face of the printer.
Use a Phillips #2 screwdriver to remove the two, 1", Phillips, PH#2 screws on the front face of the printer.
Step 6
- Use plastic opening tool to gently lift one side of the top panel from its peg.
- Repeat the first process for the other side.
- Lift the top panel from the front of the printer to remove it entirely.
Use plastic opening tool to gently lift one side of the top panel from its peg.
Repeat the first process for the other side.
Lift the top panel from the front of the printer to remove it entirely.
Step 7
- Lift the left side panel up from the raised stops.
- Gently rotate the panel, as indicated in the picture, to remove the panel entirely.
Lift the left side panel up from the raised stops.
Gently rotate the panel, as indicated in the picture, to remove the panel entirely.
Step 8
- Use Phillips #2 screwdriver to remove the five, 1", Phillips, PH#2 screws on the side metal panel.
- Remove the two, 1", Phillips, PH#2 screws on the back of the printer.
- Flip over the metal panel to reveal the gear mechanism.
Use Phillips #2 screwdriver to remove the five, 1", Phillips, PH#2 screws on the side metal panel.
Remove the two, 1", Phillips, PH#2 screws on the back of the printer.
Flip over the metal panel to reveal the gear mechanism.
Step 9
- Remove the cable attached to the motor.
- The entire panel can be removed from the rest of the printer.
- Use a Phillips #2 screwdriver to remove the motor from the panel by removing the two, 1", Phillips, PH#2 screws.
- Replace the motor and reassemble the printer by following the instructions in reverse order.
Remove the cable attached to the motor.
The entire panel can be removed from the rest of the printer.
Use a Phillips #2 screwdriver to remove the motor from the panel by removing the two, 1", Phillips, PH#2 screws.
Replace the motor and reassemble the printer by following the instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 6 other contributors
bbaustin
Member since: 10/12/2011
247 Reputation
6 Guides authored
Badges:
11
+8 more badges
Team
Cal Poly, Team 17-18, Regan Fall 2011
Member of Cal Poly, Team 17-18, Regan Fall 2011
CPSU-REGAN-F11S17G18
4 Members
6 Guides authored
