Difficulty

Moderate

Steps

8

Time Required

                          20 - 25 minutes

Sections

2

  • Removing Samsung ML2510 Back Panel
  • 3 steps
  • Power Button
  • 5 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackSamsung ML-2510

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Removing Samsung ML2510 Back Panel
  • Remove the top hinged panel by taking out the pins at the bottom of this panel.

Remove the top hinged panel by taking out the pins at the bottom of this panel.

1024

Step 2

  • Using a Phillips #2 screwdriver, remove the four screws on the back of the printer.

Using a Phillips #2 screwdriver, remove the four screws on the back of the printer.

Step 3

  • Gently lift the top panel while simultaneously pulling off the back panel.
  • Before pulling out the back panel entirely, make sure to remove the rear cooling fan from its slot.

Gently lift the top panel while simultaneously pulling off the back panel.

Before pulling out the back panel entirely, make sure to remove the rear cooling fan from its slot.

Step 4

              Power Button
  • Remove the front panel by gently separating the holes on the panel from the pegs attached to the main printer body.

Remove the front panel by gently separating the holes on the panel from the pegs attached to the main printer body.

Step 5

  • Using a Phillips #2 screwdriver, remove both 1" screws on the front face of the printer.

Using a Phillips #2 screwdriver, remove both 1" screws on the front face of the printer.

Step 6

  • Using a plastic opening tool, gently lift one side of the top panel from its peg.
  • Repeat the last step to free the opposite side of the top panel.
  • Lift the top panel from the front to remove it entirely.
  • Turn over the top panel to reveal the button on the underside of the panel.

Using a plastic opening tool, gently lift one side of the top panel from its peg.

Repeat the last step to free the opposite side of the top panel.

Lift the top panel from the front to remove it entirely.

Turn over the top panel to reveal the button on the underside of the panel.

Step 7

  • Using a Phillips #2 screwdriver, remove both 1" screws that secure the button to the underside of the top panel.

Using a Phillips #2 screwdriver, remove both 1" screws that secure the button to the underside of the top panel.

Step 8

  • Remove the clear plastic piece and the orange button from the panel.
  • Remove the orange button and the spring from the clear plastic holder.
  • Replace the button and reassemble the printer following the directions in reverse order.

Remove the clear plastic piece and the orange button from the panel.

Remove the orange button and the spring from the clear plastic holder.

Replace the button and reassemble the printer following the directions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 6 other contributors 


                    bbaustin

Member since: 10/12/2011

247 Reputation

                                      6 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       Cal Poly, Team 17-18, Regan Fall 2011                        

                                                  Member of Cal Poly, Team 17-18, Regan Fall 2011 



                    CPSU-REGAN-F11S17G18                     


                                            4 Members                     


                                            6 Guides authored