Difficulty

Moderate

Steps

9

Time Required

                          15 - 20 minutes

Sections

2

  • Removing Samsung ML2510 Back Panel
  • 3 steps
  • Side Cooling Fan
  • 6 steps

Flags

0

  • BackSamsung ML-2510

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Removing Samsung ML2510 Back Panel
  • Remove the top hinged panel by taking out the pins at the bottom of this panel.

Remove the top hinged panel by taking out the pins at the bottom of this panel.

1024

Step 2

  • Using a Phillips #2 screwdriver, remove the four screws on the back of the printer.

Using a Phillips #2 screwdriver, remove the four screws on the back of the printer.

Step 3

  • Gently lift the top panel while simultaneously pulling off the back panel.
  • Before pulling out the back panel entirely, make sure to remove the rear cooling fan from its slot.

Gently lift the top panel while simultaneously pulling off the back panel.

Before pulling out the back panel entirely, make sure to remove the rear cooling fan from its slot.

Step 4

              Side Cooling Fan
  • Locate the holes on the panel that are attached to the main body.
  • Remove the front panel by gently moving the holes from the pegs one by one.

Locate the holes on the panel that are attached to the main body.

Remove the front panel by gently moving the holes from the pegs one by one.

Step 5

  • Using a Phillips #2 screwdriver, remove the two 1" screws on the front face of the printer.

Using a Phillips #2 screwdriver, remove the two 1" screws on the front face of the printer.

Step 6

  • Using a plastic opening tool, gently lift one side of the top panel from its peg.
  • Repeat process for the other side.
  • Lift the top panel from the front to remove it entirely.

Using a plastic opening tool, gently lift one side of the top panel from its peg.

Repeat process for the other side.

Lift the top panel from the front to remove it entirely.

Step 7

  • Lift the right side-panel up from the raised stops.
  • Gently rotate the panel as indicated in the picture to remove the panel entirely.

Lift the right side-panel up from the raised stops.

Gently rotate the panel as indicated in the picture to remove the panel entirely.

Step 8

  • Poke out the side fan from the inside of the printer.

Poke out the side fan from the inside of the printer.

Step 9

  • Unplug the fan’s wires from the side circuit board.
  • Replace the fan and reassemble the printer using reverse procedures.

Unplug the fan’s wires from the side circuit board.

Replace the fan and reassemble the printer using reverse procedures.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 7 other contributors 


                    bbaustin

Member since: 10/12/2011

247 Reputation

                                      6 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       Cal Poly, Team 17-18, Regan Fall 2011                        

                                                  Member of Cal Poly, Team 17-18, Regan Fall 2011 



                    CPSU-REGAN-F11S17G18                     


                                            4 Members                     


                                            6 Guides authored