Difficulty

Moderate

Steps

5

Time Required

                          10 - 15 minutes

Sections

1

  • Camera Button
  • 5 steps

Flags

4

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackSamsung Moment

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Camera Button
  • Power off the phone using the “Power Button”, the circular middle button in the center of the phone.
  • Locate the camera button on bottom right side of your phone
  • Remove the back panel of the phone by sliding the spudger along the edge of the phone. The rear plastic panel will snap off from the remainder of the phone.

Power off the phone using the “Power Button”, the circular middle button in the center of the phone.

Locate the camera button on bottom right side of your phone

Remove the back panel of the phone by sliding the spudger along the edge of the phone. The rear plastic panel will snap off from the remainder of the phone.

1024

Step 2

  • Remove the battery from the phone by pulling up on the battery edge.

Remove the battery from the phone by pulling up on the battery edge.

Step 3

  • If you have not already removed the memory card, remove it by gently sliding it out of its holder.

If you have not already removed the memory card, remove it by gently sliding it out of its holder.

Step 4

  • Using the small Phillips #000 screw driver, remove the six screws from the back of the phone.
  • Using the spudger tool, separate the back housing from the phone.
  • While separating the back house from the phone, the three buttons (the volume, the speaker, and the camera button) might fall out. Be sure to keep track of these three buttons and use them for reassembly.

Using the small Phillips #000 screw driver, remove the six screws from the back of the phone.

Using the spudger tool, separate the back housing from the phone.

While separating the back house from the phone, the three buttons (the volume, the speaker, and the camera button) might fall out. Be sure to keep track of these three buttons and use them for reassembly.

Step 5

  • If the camera button did not fall, carefully remove it using a pair of tweezers. At this point, you can replace the button with a new one.

If the camera button did not fall, carefully remove it using a pair of tweezers. At this point, you can replace the button with a new one.

To reassemble your device, follow these instructions in reverse order.

Be sure to gently slide the memory card back in its holder.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 8 other contributors 


                    Allison Coffee

Member since: 09/26/2013

214 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge