Samsung N150 Plus Screen Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          15 - 25 minutes

Sections

Battery
3 steps
Back Panel
3 steps
Screen
8 steps

Flags

BackSamsung NP-N150-JPB1US
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Turn off the computer.
Disconnect the charging cable from the laptop.
Failure to unplug the cable could result in electric shock.
Flip the laptop upside down with the front face down on a flat surface.

Turn off the computer.

Disconnect the charging cable from the laptop.

Failure to unplug the cable could result in electric shock.

Flip the laptop upside down with the front face down on a flat surface.

1024

Step 2

Slide the left and right switch to the “unlocked” position.

Slide the left and right switch to the “unlocked” position.

Step 3

While holding the left and right hand switches in the “unlocked” position, push the battery away from the computer.

While holding the left and right hand switches in the “unlocked” position, push the battery away from the computer.

Step 4

              Back Panel

Using the Phillip’s 00 screwdriver, unscrew the fourteen 7mm screws until the back panel comes loose.

Using the Phillip’s 00 screwdriver, unscrew the fourteen 7mm screws until the back panel comes loose.

Step 5

Using either the blue plastic opening tools or spudger tool, wedge one in between the back panel and the laptop.
Apply pressure upwards till the back panel pops off.
If the back panel is difficult to remove and feels like it is going to break, DO NOT force it. Check to confirm that all the screws are removed before attempting again.

Using either the blue plastic opening tools or spudger tool, wedge one in between the back panel and the laptop.

Apply pressure upwards till the back panel pops off.

If the back panel is difficult to remove and feels like it is going to break, DO NOT force it. Check to confirm that all the screws are removed before attempting again.

Step 6

The computer should be open with the motherboard exposed and internal components exposed. You should now be able to access the Fan and RAM. There are more necessary steps to follow before accessing the screen and keyboard.

The computer should be open with the motherboard exposed and internal components exposed. You should now be able to access the Fan and RAM. There are more necessary steps to follow before accessing the screen and keyboard.

Step 7

              Screen

Unclip the two white wires connected to the computer chip on the motherboard by pulling the white wire toward you.
Make sure you don’t damage the terminals for the white wires on the computer chip by pulling to hard on them.
Remove the yellow tape securing the black cable that is connected to the motherboard.
Be gentle when removing the yellow tape. It is very thin and can ripe easily.
Once you have removed the yellow tape, unplug the black cable from its connection on the motherboard.

Unclip the two white wires connected to the computer chip on the motherboard by pulling the white wire toward you.

Make sure you don’t damage the terminals for the white wires on the computer chip by pulling to hard on them.

Remove the yellow tape securing the black cable that is connected to the motherboard.

Be gentle when removing the yellow tape. It is very thin and can ripe easily.

Once you have removed the yellow tape, unplug the black cable from its connection on the motherboard.

Step 8

Use a Phillips #00 screwdriver to unscrew the four 5 mm screws located on the two hinges.

Use a Phillips #00 screwdriver to unscrew the four 5 mm screws located on the two hinges.

Step 9

Slowly remove the screen case from the rest of the laptop by pulling the screen case out of the hinge sockets.

Slowly remove the screen case from the rest of the laptop by pulling the screen case out of the hinge sockets.

Step 10

Use a Phillips #00 to unscrew the four 5mm screws located at the top and bottom corners of the screen bezel.

Use a Phillips #00 to unscrew the four 5mm screws located at the top and bottom corners of the screen bezel.

Step 11

Use the spudger or plastic opening tools to wedge it in-between the screen bezel and bottom of the screen case.
Apply pressure upwards to pop the screen bezel open.

Use the spudger or plastic opening tools to wedge it in-between the screen bezel and bottom of the screen case.

Apply pressure upwards to pop the screen bezel open.

Step 12

Use a Phillips #00 screwdriver to unscrew the four 5mm mounting screws that secure the screen to the bottom case.

Use a Phillips #00 screwdriver to unscrew the four 5mm mounting screws that secure the screen to the bottom case.

Step 13

Lift the screen out of the bottom screen case and locate the white plug connected to the bottom case.
Pull the wires away from you to unplug the wires from their connection on the bottom screen case.
Be gentle when pulling on the wires, so that you don’t disconnect them from their plug.
Unclip half of the black case hinge to release the wire from its casing

Lift the screen out of the bottom screen case and locate the white plug connected to the bottom case.

Pull the wires away from you to unplug the wires from their connection on the bottom screen case.

Be gentle when pulling on the wires, so that you don’t disconnect them from their plug.

Unclip half of the black case hinge to release the wire from its casing

Step 14

The screen is fully disconnected from the screen bezel and can now be removed.

The screen is fully disconnected from the screen bezel and can now be removed.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      6 other people completed this guide.

Author

                                      with 3 other contributors

                    patrick Russell

Member since: 04/03/2016

788 Reputation

                                      6 Guides authored                  



                       Badges:
                       14







                                                        +11 more badges

Team

                       Eastern Washington University, Team 2-3, Andersen Spring 2016                        

                                                  Member of Eastern Washington University, Team 2-3, Andersen Spring 2016 



                    EWU-ANDERSEN-S16S2G3                     


                                            5 Members                     


                                            6 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team