Samsung Np 130 Ja01Us Hard Drive Replacement Repair Guide

Difficulty

Moderate

Steps

7

Time Required

                          15 - 25 minutes            

Sections

2

• Battery
• 3 steps
• Hard Drive
• 4 steps

Flags

1

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

• BackSamsung NP-130-JA01US

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Turn off the computer.
• Disconnect the charger cable from the computer.
• Failure to disconnect the charger cable from the computer could result in an electric shock.
• Flip the computer over so the underside is facing up.

Turn off the computer.

Disconnect the charger cable from the computer.

Failure to disconnect the charger cable from the computer could result in an electric shock.

Flip the computer over so the underside is facing up.

1024

Step 2

• Slide the left and right slider buttons fully away from each other.

Slide the left and right slider buttons fully away from each other.

Step 3

• Pull the battery out of the computer.

Pull the battery out of the computer.

Step 4

              Hard Drive               

• Using a Philips 1 screwdriver carefully remove all 12 screws of the back cover.
• The screws are Phillips 1 (PH 1) with a length of 60 millimeters (mm)
• Do not force the screwdriver as you might damage the screws.

Using a Philips 1 screwdriver carefully remove all 12 screws of the back cover.

The screws are Phillips 1 (PH 1) with a length of 60 millimeters (mm)

Do not force the screwdriver as you might damage the screws.

Step 5

• With the plastic opening tool, carefully separate the back cover from the computer frame.
• Starting at one of the corners of the computer, work your way around the edge until you reach the other corner.
• Do not attempt to pry it open, putting too much force into one location might damage the computer.
• As you go around the sides of the computer, free the inside latches with the plastic opening tool.
• Once you have an opening, carefully use your hands to separate the back cover.

With the plastic opening tool, carefully separate the back cover from the computer frame.

Starting at one of the corners of the computer, work your way around the edge until you reach the other corner.

Do not attempt to pry it open, putting too much force into one location might damage the computer.

As you go around the sides of the computer, free the inside latches with the plastic opening tool.

Once you have an opening, carefully use your hands to separate the back cover.

Step 6

• Locate Hard Drive (red square)
• Using a Phillips 1 screw driver, remove the screw marked in the red circle.
• The screw is a Phillips 1 (PH 1) with a length of 40 millimeters (mm)
• Unscrew carefully to prevent losing or breaking pieces.

Locate Hard Drive (red square)

Using a Phillips 1 screw driver, remove the screw marked in the red circle.

The screw is a Phillips 1 (PH 1) with a length of 40 millimeters (mm)

Unscrew carefully to prevent losing or breaking pieces.

Step 7

• Gently remove the hard drive.

Gently remove the hard drive.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 3 other contributors 

                    Jorge Quintana                     

Member since: 10/05/2016

260 Reputation

                                      1 Guide authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       USF Tampa, Team 9-6, Lacy Fall 2016                        

                                                  Member of USF Tampa, Team 9-6, Lacy Fall 2016 



                    USFT-LACY-F16S9G6                     


                                            3 Members                     


                                            5 Guides authored