Difficulty
Easy
Steps
4
Time Required
5 - 10 minutes
Sections
1
- RAM
- 4 steps
Flags
0
BackSamsung NP-N102S-B05PH
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
RAM
- Use a Phillips #0 screwdriver, take out the 4.6mm screw holding the RAM slot down.
Use a Phillips #0 screwdriver, take out the 4.6mm screw holding the RAM slot down.
1024
Step 2
- Insert the flat end of the black spudger into the small notch in the RAM slot and lift the top off.
Insert the flat end of the black spudger into the small notch in the RAM slot and lift the top off.
Step 3
- Now that the RAM chip has been exposed, use your fingertip and the black spudger to push back the metal tabs on each side, allowing the RAM chip to come free.
Now that the RAM chip has been exposed, use your fingertip and the black spudger to push back the metal tabs on each side, allowing the RAM chip to come free.
Step 4
- Finally, use the black spudger to get underneath the loosened RAM chip and gently pull it up and out of the laptop.
Finally, use the black spudger to get underneath the loosened RAM chip and gently pull it up and out of the laptop.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Daniel Rudzik
Member since: 10/04/2016
349 Reputation
3 Guides authored
Badges:
7
+4 more badges
Team
USF Tampa, Team 2-4, Nance Fall 2016
Member of USF Tampa, Team 2-4, Nance Fall 2016
USFT-NANCE-F16S2G4
4 Members
5 Guides authored