Samsung Np N310 Haa2Us Hard Drive Replacement Repair Guide

Difficulty

Moderate

Steps

4

Time Required

                          15 - 20 minutes            

Sections

3

• Battery
• 1 step
• Back Panel
• 2 steps
• Hard Drive
• 1 step

Flags

1

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

• BackSamsung NP N310 HAA2US

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Make sure the laptop is powered off, and unplugged before removing the battery.
• Slide the battery switch to the unlock symbol, and the battery will pop up.
• Remove the battery.

Make sure the laptop is powered off, and unplugged before removing the battery.

Slide the battery switch to the unlock symbol, and the battery will pop up.

Remove the battery.

1024

Step 2

              Back Panel               

• Locate, and unscrew the 11 Phillips 8mm back cover screws, and 1 Phillips 5mm screw on the RAM cover. Use a #1 Philips screw driver to remove the screws.
• If there are rubber pads covering the screws, use a spudger to remove the rubber pads.

Locate, and unscrew the 11 Phillips 8mm back cover screws, and 1 Phillips 5mm screw on the RAM cover. Use a #1 Philips screw driver to remove the screws.

If there are rubber pads covering the screws, use a spudger to remove the rubber pads.

Step 3

• Insert the plastic opening tool in the break between the back panel, and the keyboard.
• Drag the opening tool around the edge to separate it.
• Pull the back panel off of the laptop.

Insert the plastic opening tool in the break between the back panel, and the keyboard.

Drag the opening tool around the edge to separate it.

Pull the back panel off of the laptop.

Step 4

              Hard Drive               

• Unscrew the 3 Phillips 3.5 mm screws. Use a size 1 Phillips screwdriver.
• Lift the hardrive.
• Pull the hard drive out.

Unscrew the 3 Phillips 3.5 mm screws. Use a size 1 Phillips screwdriver.

Lift the hardrive.

Pull the hard drive out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Amir Afridi                     

Member since: 09/29/2016

626 Reputation

                                      6 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges                           

Team

                       USF Tampa, Team 4-1, Passmore Fall 2016                        

                                                  Member of USF Tampa, Team 4-1, Passmore Fall 2016 



                    USFT-PASSMORE-F16S4G1                     


                                            4 Members                     


                                            6 Guides authored