Difficulty

Moderate

Steps

8

Time Required

Suggest a time??

Sections

3

  • Battery
  • 3 steps
  • Back Plate
  • 3 steps
  • Hard Drive
  • 2 steps

Flags

0

  • BackSamsung NP-NC10-KA02US

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Locate the external battery on the bottom side of the device.
  • Locate the tab on the right side of the battery.
  • Shift the tab to the left.

Locate the external battery on the bottom side of the device.

Locate the tab on the right side of the battery.

Shift the tab to the left.

1024

Step 2

  • Locate the tab on the left side of the device’s battery.
  • Push the left tab to the right.

Locate the tab on the left side of the device’s battery.

Push the left tab to the right.

Step 3

  • Pull the battery up from the device.

Pull the battery up from the device.

Step 4

              Back Plate
  • Locate the 14, 3.93 mm, screws that need to be removed on the base of the computer.

Locate the 14, 3.93 mm, screws that need to be removed on the base of the computer.

Step 5

  • Remove all 14 of the 3.93 mm screws using a PH1 screw bit.

Remove all 14 of the 3.93 mm screws using a PH1 screw bit.

Step 6

  • Using two plastic opening tools remove the back plate.
  • These plastic opening tools have a flat-head that extends as a wedge which are utilized to separate pressure fit plastic components without causing any damage to them.
  • The back plate is now removed exposing all of the hardware components.

Using two plastic opening tools remove the back plate.

These plastic opening tools have a flat-head that extends as a wedge which are utilized to separate pressure fit plastic components without causing any damage to them.

The back plate is now removed exposing all of the hardware components.

Step 7

              Hard Drive
  • Locate the hard drive.
  • Remove the one 3.93 mm screw holding the hard drive in place using a PH1 screw bit.

Locate the hard drive.

Remove the one 3.93 mm screw holding the hard drive in place using a PH1 screw bit.

Step 8

  • Hold the end of the hard drive farthest from where it is connected to the netbook. Then gently pull in the opposite direction of where the hard drive is connected.
  • Your hard drive is now removed.

Hold the end of the hard drive farthest from where it is connected to the netbook. Then gently pull in the opposite direction of where the hard drive is connected.

Your hard drive is now removed.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.

Author

                                      with 4 other contributors 


                    Brian Smith

Member since: 10/03/2016

357 Reputation

                                      2 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       USF Tampa, Team 1-1, Sullivan Fall 2016                        

                                                  Member of USF Tampa, Team 1-1, Sullivan Fall 2016 



                    USFT-SULLIVAN-F16S1G1                     


                                            3 Members                     


                                            6 Guides authored

นพไกร ใจดี - Jan 9, 2018

Reply

Thanks for your kindness.

Lucky Jacob - May 3, 2021

Reply

Where can I get the screws from