Difficulty
Easy
Steps
3
Time Required
5 - 10 minutes
Sections
1
- Hard Drive
- 3 steps
Flags
0
BackSamsung NP-R540-JA09US
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Hard Drive
- Flip the device to the bottoms-up position and locate the panel that says HDD.
- In case of damage to panel, the HDD panel is just immediately right of the optical drive, and opposite from the battery
Flip the device to the bottoms-up position and locate the panel that says HDD.
In case of damage to panel, the HDD panel is just immediately right of the optical drive, and opposite from the battery
1024
Step 2
- Remove the two 3.7mm securing screws with a Phillips #0 screwdriver.
- After removing the screws, remove the panel covering the HDD.
Remove the two 3.7mm securing screws with a Phillips #0 screwdriver.
After removing the screws, remove the panel covering the HDD.
Step 3
- Remove the screws on the bracket and then remove the bracket by pulling up.
- Once the bracket has been removed, slide the hard drive towards the gap in the cavity and then remove it from the device.
Remove the screws on the bracket and then remove the bracket by pulling up.
Once the bracket has been removed, slide the hard drive towards the gap in the cavity and then remove it from the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 2 other contributors
Conner Patterson
Member since: 09/21/2018
381 Reputation
3 Guides authored
Badges:
8
+5 more badges
Team
University of North Texas, Team S6-G4, Thompson Fall 2018
Member of University of North Texas, Team S6-G4, Thompson Fall 2018
UNT-THOMPSON-F18S6G4
4 Members
6 Guides authored