Difficulty

Easy

Steps

6

Time Required

                          15 minutes

Sections

2

  • Battery
  • 2 steps
  • RAM
  • 4 steps

Flags

0

  • BackSamsung NP270E5E-K03US

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Begin with the laptop lying to its back revealing its underside.
  • Locate the two latches on the bottom of the laptop. Slide the latches inward until a faint click is heard.

Begin with the laptop lying to its back revealing its underside.

Locate the two latches on the bottom of the laptop. Slide the latches inward until a faint click is heard.

1024

Step 2

  • Completely remove the battery from the laptop.

Completely remove the battery from the laptop.

Step 3

              RAM
  • Remove the 4mm screw with a Phillips #0 screwdriver.

Remove the 4mm screw with a Phillips #0 screwdriver.

Step 4

  • Once the screw holding the cover down has been removed the cover can then be removed by sliding the cover in the direction of the gray arrow on the laptop.
  • The cover can then be removed to reveal the laptops RAM boards and also the laptops hard drive.

Once the screw holding the cover down has been removed the cover can then be removed by sliding the cover in the direction of the gray arrow on the laptop.

The cover can then be removed to reveal the laptops RAM boards and also the laptops hard drive.

Step 5

  • The RAM boards are each held in place by a pair of spring latches (indicated by red circles) which must be disengaged.
  • To disengage the latches you must push them gently outwards until a soft click is heard.
  • If you are successful in disengaging the latches the RAM board will pop upwards allowing for easy removal.

The RAM boards are each held in place by a pair of spring latches (indicated by red circles) which must be disengaged.

To disengage the latches you must push them gently outwards until a soft click is heard.

If you are successful in disengaging the latches the RAM board will pop upwards allowing for easy removal.

Step 6

  • You can now pull the RAM board from the housing freeing up space for your new replacement RAM board.
  • Do not try to remove the RAM before the latches have disengaged and the RAM has popped up, otherwise risk damaging the computer / components.

You can now pull the RAM board from the housing freeing up space for your new replacement RAM board.

Do not try to remove the RAM before the latches have disengaged and the RAM has popped up, otherwise risk damaging the computer / components.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Kyle Golden

Member since: 03/23/2017

329 Reputation

                                      3 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       UMass Dartmouth, Team S9-G1, Martin Spring 2017                        

                                                  Member of UMass Dartmouth, Team S9-G1, Martin Spring 2017 



                    UMASSD-MARTIN-S17S9G1                     


                                            3 Members                     


                                            5 Guides authored