Samsung Np36535C S05Us Display Screen Replacement Repair Guide

Difficulty

Moderate

Steps

12

Time Required

                          20 - 30 minutes            

Sections

2

• Battery
• 3 steps
• Display Screen
• 9 steps

Flags

0

• BackSamsung NP36535C-S05US

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Turn the computer off.
• Disconnect the charging cable from the laptop.
• Failure to disconnect cable may result in electric shock.
• Flip the laptop face down on a flat surface.

Turn the computer off.

Disconnect the charging cable from the laptop.

Failure to disconnect cable may result in electric shock.

Flip the laptop face down on a flat surface.

1024

Step 2

• Slide the left and right switches to the unlock position.

Slide the left and right switches to the unlock position.

Step 3

• While holding the left and right lock switches in the unlock position, pull the battery away from the computer.

While holding the left and right lock switches in the unlock position, pull the battery away from the computer.

Step 4

              Display Screen               

• Open the laptop.
• Locate the two (2) screw covers.
• Remove the screw covers with the metal spudger.

Open the laptop.

Locate the two (2) screw covers.

Remove the screw covers with the metal spudger.

Step 5

• Remove the two (2) 2.27 mm screws with the Philips #0 screwdriver.

Remove the two (2) 2.27 mm screws with the Philips #0 screwdriver.

Step 6

• Carefully pry the front display cover off with a plastic prying tool.

Carefully pry the front display cover off with a plastic prying tool.

Step 7

• Locate the six (6) 2.39 mm screws on the display bracket.
• Remove the four (4) screws on the left and right sides of the display bracket located near the base of the display with the Philips #0 screwdriver.
• Remove the two (2) screws on the left and right sides of the display bracket located near the top of the display with the Phillips #0 screwdriver.

Locate the six (6) 2.39 mm screws on the display bracket.

Remove the four (4) screws on the left and right sides of the display bracket located near the base of the display with the Philips #0 screwdriver.

Remove the two (2) screws on the left and right sides of the display bracket located near the top of the display with the Phillips #0 screwdriver.

Step 8

• Carefully remove the connector between the display and the display casing by pulling the connector away from its outlet.

Carefully remove the connector between the display and the display casing by pulling the connector away from its outlet.

Step 9

• Locate the six (6) 1.85 mm screws on the left and right brackets holding the display in place.
• Remove the screws on each side of the bracket, alternating sides when removing each screw with the Philips #0 screwdriver.

Locate the six (6) 1.85 mm screws on the left and right brackets holding the display in place.

Remove the screws on each side of the bracket, alternating sides when removing each screw with the Philips #0 screwdriver.

Step 10

• Locate the display connector on the back of the display.
• Carefully remove the tape on the display connector.
• Remove the display connector by unplugging it from its outlet.

Locate the display connector on the back of the display.

Carefully remove the tape on the display connector.

Remove the display connector by unplugging it from its outlet.

Step 11

• Locate and remove the tape from the back of the display in the two (2) sections marked on the supporting image.

Locate and remove the tape from the back of the display in the two (2) sections marked on the supporting image.

Step 12

• You have successfully removed the display screen.

You have successfully removed the display screen.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 2 other contributors 

                    Mykel Vanek                     

Member since: 09/21/2017

334 Reputation

                                      3 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       Eastern Washington University, Team S2-G1, Crane Fall 2017                        

                                                  Member of Eastern Washington University, Team S2-G1, Crane Fall 2017 



                    EWU-CRANE-F17S2G1                     


                                            4 Members                     


                                            6 Guides authored