Difficulty

Very easy

Steps

6

Time Required

                          5 minutes

Sections

2

  • Battery
  • 3 steps
  • Key
  • 3 steps

Flags

0

  • BackSamsung NP36535C-S05US

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Turn the computer off.
  • Disconnect the charging cable from the laptop.
  • Failure to disconnect cable may result in electric shock.
  • Flip the laptop face down on a flat surface.

Turn the computer off.

Disconnect the charging cable from the laptop.

Failure to disconnect cable may result in electric shock.

Flip the laptop face down on a flat surface.

1024

Step 2

  • Slide the left and right switches to the unlock position.

Slide the left and right switches to the unlock position.

Step 3

  • While holding the left and right lock switches in the unlock position, pull the battery away from the computer.

While holding the left and right lock switches in the unlock position, pull the battery away from the computer.

Step 4

              Key
  • There is an outer and inner piece of the retainer. The outer retainer has two (2) grooves for the inner retainer’s posts to sit in.
  • Place the inner retainer piece into the outer retainer piece by inserting the posts into the grooves on the outer retainer piece.

There is an outer and inner piece of the retainer. The outer retainer has two (2) grooves for the inner retainer’s posts to sit in.

Place the inner retainer piece into the outer retainer piece by inserting the posts into the grooves on the outer retainer piece.

Step 5

  • There are two (2) grooves on the outer retainer that fit onto two (2) metal brackets on the key’s designated space.
  • Use angled tweezers to place the assembled retainer onto the two (2) metal brackets on the keyboard.

There are two (2) grooves on the outer retainer that fit onto two (2) metal brackets on the key’s designated space.

Use angled tweezers to place the assembled retainer onto the two (2) metal brackets on the keyboard.

Step 6

  • Once the retainer is attached, press the key onto the retainer, it will make a snapping sound when in place.

Once the retainer is attached, press the key onto the retainer, it will make a snapping sound when in place.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Mykel Vanek

Member since: 09/21/2017

334 Reputation

                                      3 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Eastern Washington University, Team S2-G1, Crane Fall 2017                        

                                                  Member of Eastern Washington University, Team S2-G1, Crane Fall 2017 



                    EWU-CRANE-F17S2G1                     


                                            4 Members                     


                                            6 Guides authored