Difficulty

Moderate

Steps

8

Time Required

                          10 minutes            

Sections

3

  • Battery
  • 3 steps
  • ODD/HDD/Memory panel
  • 1 step
  • RAM
  • 4 steps

Flags

0

  • BackSamsung NP36535C-S05US

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery               
  • Turn the computer off.
  • Disconnect the charging cable from the laptop.
  • Failure to disconnect cable may result in electric shock.
  • Flip the laptop face down on a flat surface.

Turn the computer off.

Disconnect the charging cable from the laptop.

Failure to disconnect cable may result in electric shock.

Flip the laptop face down on a flat surface.

1024

Step 2

  • Slide the left and right switches to the unlock position.

Slide the left and right switches to the unlock position.

Step 3

  • While holding the left and right lock switches in the unlock position, pull the battery away from the computer.

While holding the left and right lock switches in the unlock position, pull the battery away from the computer.

Step 4

              ODD/HDD/Memory panel               
  • Locate the ODD/HDD/Memory panel.
  • Remove the 1.9 mm screw located on the ODD/HDD/Memory panel with the Philips #0 screwdriver.
  • Slide the ODD/HDD/Memory panel away from the device to remove it.

Locate the ODD/HDD/Memory panel.

Remove the 1.9 mm screw located on the ODD/HDD/Memory panel with the Philips #0 screwdriver.

Slide the ODD/HDD/Memory panel away from the device to remove it.

Step 5

              RAM               
  • Locate the two (2) RAM chips in the upper left corner.

Locate the two (2) RAM chips in the upper left corner.

Step 6

  • Locate the two (2) metal brackets holding the RAM chip in place.
  • Carefully push the brackets outwards away from the RAM chip, causing it to pop out of the brackets.
  • Remove the first RAM chip by pulling it up and out of its plug.

Locate the two (2) metal brackets holding the RAM chip in place.

Carefully push the brackets outwards away from the RAM chip, causing it to pop out of the brackets.

Remove the first RAM chip by pulling it up and out of its plug.

Step 7

  • Locate the second set of metal brackets holding the remaining RAM chip.
  • Carefully push the brackets outwards away from the RAM chip, causing it to pop out of the brackets.
  • Remove the second RAM chip by pulling it up and out of its plug.

Locate the second set of metal brackets holding the remaining RAM chip.

Remove the second RAM chip by pulling it up and out of its plug.

Step 8

  • You have successfully removed the RAM chips.

You have successfully removed the RAM chips.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Jessie Coney                     

Member since: 09/27/2017

325 Reputation

                                      3 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       Eastern Washington University, Team S2-G1, Crane Fall 2017                        

                                                  Member of Eastern Washington University, Team S2-G1, Crane Fall 2017 



                    EWU-CRANE-F17S2G1                     


                                            4 Members                     


                                            6 Guides authored