Difficulty

Easy

Steps

7

Time Required

                          15 - 30 minutes

Sections

1

  • Fan
  • 7 steps

Flags

0

  • BackSamsung NP540U3C-A02UB

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

The fan provides cooling for the internal components of the laptop. After long periods of use or intensive use of the laptop, the internal components heat up. This is mitigated by removing heat from the inside of the laptop using a fan, as components may become damaged when overheated. If you believe your laptop is experiencing overheating, see our troubleshooting guide for possible causes before attempting to replace the fan.

Before replacing the fan, inspect the fan for dust and debris that may be affecting the fans ability to cool the laptop. Debris can be removed from the fan using a soft cloth or cotton swabs and dust can be removed using a compressed air duster. Make sure the vents of the laptop are also clear of dust and debris to eliminate any possibilities short of a failing fan.

What you need

Step 1

              Fan
  • Turn off the laptop and disconnect from the charging cable before beginning disassembly.
  • Place the laptop flat with its bottom facing up.

Turn off the laptop and disconnect from the charging cable before beginning disassembly.

Place the laptop flat with its bottom facing up.

1024

Step 2

  • Remove the 1x 4mm Phillips #00 screw labeled “HDD Memory”.

Remove the 1x 4mm Phillips #00 screw labeled “HDD Memory”.

Step 3

  • Gently release the three clips holding the HDD cover with the plastic opening tool.
  • Remove the HDD cover from the device.

Gently release the three clips holding the HDD cover with the plastic opening tool.

Remove the HDD cover from the device.

Step 4

  • Peel the yellow tape up so it no longer blocks the fan’s wires and screw.

Peel the yellow tape up so it no longer blocks the fan’s wires and screw.

Step 5

  • Remove the two 2.4mm Phillips #00 screws attaching the fan to the case.
  • Remove the two 6mm Phillips #00 screws attaching the fan to the case.

Remove the two 2.4mm Phillips #00 screws attaching the fan to the case.

Remove the two 6mm Phillips #00 screws attaching the fan to the case.

Step 6

  • Using the plastic opening tool, gently disconnect the fan from the motherboard by unplugging the wire.

Using the plastic opening tool, gently disconnect the fan from the motherboard by unplugging the wire.

Step 7

  • Remove the fan from the case.

Remove the fan from the case.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Colby Bolger

Member since: 03/28/2022

277 Reputation

                                      2 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       UMass Dartmouth, Team C-1, Gurgel Spring 2022                        

                                                  Member of UMass Dartmouth, Team C-1, Gurgel Spring 2022 



                    UMASSD-GURGEL-S22SCG1                     


                                            4 Members                     


                                            6 Guides authored