Difficulty

Easy

Steps

6

Time Required

                          5 - 10 minutes

Sections

1

  • Battery
  • 6 steps

Flags

0

  • BackSamsung NP700Z5AH

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Remove the ten 6.6mm Philips#00 screws securing the lower case to the upper case.

Remove the ten 6.6mm Philips#00 screws securing the lower case to the upper case.

1024

Step 2

  • Using your fingers, pinch the edge of the SD card and pull to remove it.

Using your fingers, pinch the edge of the SD card and pull to remove it.

Step 3

  • Wedge your fingers in between the upper case and the lower case
  • Gently pull the lower case away from the upper case to remove it

Wedge your fingers in between the upper case and the lower case

Gently pull the lower case away from the upper case to remove it

Step 4

  • Using tweezers or your fingertips, carefully pull on the battery connector to disconnect it from the motherboard.
  • Be sure to pull straight backwards, or you risk damaging the wires.

Using tweezers or your fingertips, carefully pull on the battery connector to disconnect it from the motherboard.

Be sure to pull straight backwards, or you risk damaging the wires.

Step 5

  • Remove the two 4.4mm Phillips#00 screws from the battery case.

Remove the two 4.4mm Phillips#00 screws from the battery case.

Step 6

  • Place your fingers on the corner sections of the battery.
  • Lift to remove the battery.
  • If you choose to use tools to remove the battery be careful not to damage it. A damaged lithium-ion battery may leak dangerous chemicals and/or catch fire. Use only plastic pry tools.

Place your fingers on the corner sections of the battery.

Lift to remove the battery.

If you choose to use tools to remove the battery be careful not to damage it. A damaged lithium-ion battery may leak dangerous chemicals and/or catch fire. Use only plastic pry tools.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.

Author

                                      with 2 other contributors 


                    Erik

Member since: 09/27/2017

826 Reputation

                                      6 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Eastern Washington University, Team S1-G1, Carnegie Fall 2017                        

                                                  Member of Eastern Washington University, Team S1-G1, Carnegie Fall 2017 



                    EWU-CARNEGIE-F17S1G1                     


                                            3 Members                     


                                            6 Guides authored