Difficulty
Easy
Steps
4
Time Required
1 - 3 minutes
Sections
1
- RAM
- 4 steps
Flags
0
BackSamsung NP700Z5AH
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
RAM
- Using the Phillips #00 screwdriver, remove the 6.6mm screw from the memory slot cover.
Using the Phillips #00 screwdriver, remove the 6.6mm screw from the memory slot cover.
1024
Step 2
- Wedge your finger underneath the edge of the memory cover. Grasp and pull the cover to the left to remove it.
Wedge your finger underneath the edge of the memory cover. Grasp and pull the cover to the left to remove it.
Step 3
- Using the tweezers, push the edges of the metal clasps holding the ram card away from the card. You should see the card pop upwards.
Using the tweezers, push the edges of the metal clasps holding the ram card away from the card. You should see the card pop upwards.
Step 4
- Using the tweezers, grasp the ram card and pull straight out to remove it.
Using the tweezers, grasp the ram card and pull straight out to remove it.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Erik
Member since: 09/27/2017
826 Reputation
6 Guides authored
Badges:
9
+6 more badges
Team
Eastern Washington University, Team S1-G1, Carnegie Fall 2017
Member of Eastern Washington University, Team S1-G1, Carnegie Fall 2017
EWU-CARNEGIE-F17S1G1
3 Members
6 Guides authored