Difficulty
Easy
Steps
4
Time Required
10 minutes
Sections
1
- Battery
- 4 steps
Flags
0
BackSamsung Series 9 NP900X4B-A02
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Before completing this guide ensure that the laptop is unplugged and turned off.
If the battery appears to be swollen, use extreme caution when removing the battery.
What you need
Step 1
Battery
- Ensure computer is unplugged and powered down before continuing.
- Remove the ten screws along the base using a Phillips #000.
- Use a Plastic Opening Tool to pry open the base .
Ensure computer is unplugged and powered down before continuing.
Remove the ten screws along the base using a Phillips #000.
Use a Plastic Opening Tool to pry open the base .
1024
Step 2
- The battery is now unobstructed from your view.
- Before removing the battery, use the plastic opening tool to detach the ribbon wire cable that connects the battery to the motherboard.
The battery is now unobstructed from your view.
Before removing the battery, use the plastic opening tool to detach the ribbon wire cable that connects the battery to the motherboard.
Step 3
- Use the Phillips #000 screwdriver to remove six screws that are holding the battery in place.
Use the Phillips #000 screwdriver to remove six screws that are holding the battery in place.
Step 4
- Lift and pull out the battery.
Lift and pull out the battery.
To reassemble your device, follow the above steps in reverse order.
Cancel: I did not complete this guide.
Author
with 5 other contributors
Nathan LeBlanc
Member since: 10/17/2018
109 Reputation
1 Guide authored
Badges:
2
Team
UMass Dartmouth, Team S4-G6, Valliere Fall 2018
Member of UMass Dartmouth, Team S4-G6, Valliere Fall 2018
UMASSD-VALLIERE-F18S4G6
5 Members
6 Guides authored