Difficulty

Moderate

Steps

7

Time Required

                          15 minutes

Sections

2

  • Back Panel
  • 3 steps
  • Fan
  • 4 steps

Flags

0

  • BackSamsung Series 9 NP900X4B-A02

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Panel
  • First turn the computer over so you are looking at the back panel.
  • Next locate all ten Phillips #0 3.5mm screws on the back panel that are securing it down.

First turn the computer over so you are looking at the back panel.

Next locate all ten Phillips #0 3.5mm screws on the back panel that are securing it down.

1024

Step 2

  • Next remove all 3.5mm Phillips #0 screws shown in the previous step.

Next remove all 3.5mm Phillips #0 screws shown in the previous step.

Step 3

  • After all screws are removed, lift up the back panel as shown.

After all screws are removed, lift up the back panel as shown.

Step 4

              Fan
  • Next locate the two Phillips #0 2.5mm screws on both the top right and bottom left corner of the fan.

Next locate the two Phillips #0 2.5mm screws on both the top right and bottom left corner of the fan.

Step 5

  • After locating the screws, using the Phillips #0 screwdriver, remove the screws from the fan.

After locating the screws, using the Phillips #0 screwdriver, remove the screws from the fan.

Step 6

  • Use the plastic opening tool to remove the cable connector from its housing which is just to the right of the fan.

Use the plastic opening tool to remove the cable connector from its housing which is just to the right of the fan.

Step 7

  • Once the cable has been removed from its housing you are free to remove the fan from the laptop.
  • You can either clean the fan with a computer duster or other cleaner, or replace it with a new one.

Once the cable has been removed from its housing you are free to remove the fan from the laptop.

You can either clean the fan with a computer duster or other cleaner, or replace it with a new one.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Brian Miller

Member since: 10/17/2018

305 Reputation

                                      2 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       UMass Dartmouth, Team S4-G6, Valliere Fall 2018                        

                                                  Member of UMass Dartmouth, Team S4-G6, Valliere Fall 2018 



                    UMASSD-VALLIERE-F18S4G6                     


                                            5 Members                     


                                            6 Guides authored