Samsung Np900X4B Ram Replacement Repair Guide

Difficulty

Easy

Steps

5

Time Required

                          15 minutes            

Sections

1

• RAM
• 5 steps

Flags

Missing Prerequisites

This guide is missing information on how to start the process. Make a prerequisite guide!

• BackSamsung Series 9 NP900X4B-A02

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              RAM               

• This guide should be attempted after the removal of the back panel is completed.
• The Battery Removal guide demonstrates how to do this. The link to this guide is posed here. Samsung NP900X4B Battery Replacement

This guide should be attempted after the removal of the back panel is completed.

The Battery Removal guide demonstrates how to do this. The link to this guide is posed here. Samsung NP900X4B Battery Replacement

1024

Step 2

• Locate the two sticks or DDR3 RAM. They can be found in the upper right-hand corner.

Locate the two sticks or DDR3 RAM. They can be found in the upper right-hand corner.

Step 3

• Use a plastic opening tool to nudge one clamp holding one stick of RAM outward. If done correctly the clamp should move away from the stick of RAM. Do this with the clamp on the opposite side of the same stick or RAM. The stick of RAM will pop up when both clamps are released

Use a plastic opening tool to nudge one clamp holding one stick of RAM outward. If done correctly the clamp should move away from the stick of RAM. Do this with the clamp on the opposite side of the same stick or RAM. The stick of RAM will pop up when both clamps are released

Step 4

• Repeat step 3 with the second stick of RAM. Again, when this is done correctly the RAM should pop up at an angle away from the laptop.

Repeat step 3 with the second stick of RAM. Again, when this is done correctly the RAM should pop up at an angle away from the laptop.

Step 5

• Perform the previous steps in the reverse order to install two new sticks of RAM into the DDR3 slots. Make sure that the clamps click back in place. Failure to do so could result in non responsive sticks of RAM. If this is an issue, not to worry. Try taking the clamps off and reinstering the RAM.

Perform the previous steps in the reverse order to install two new sticks of RAM into the DDR3 slots. Make sure that the clamps click back in place. Failure to do so could result in non responsive sticks of RAM. If this is an issue, not to worry. Try taking the clamps off and reinstering the RAM.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 3 other contributors 

                    Bryton Lawrence                     

Member since: 10/17/2018

309 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       UMass Dartmouth, Team S4-G6, Valliere Fall 2018                        

                                                  Member of UMass Dartmouth, Team S4-G6, Valliere Fall 2018 



                    UMASSD-VALLIERE-F18S4G6                     


                                            5 Members                     


                                            6 Guides authored