Samsung Np900X4B Ssd Hard Drive Replacement Repair Guide

Difficulty

Moderate

Steps

3

Time Required

                          15 - 20 minutes            

Sections

1

• SSD Hard Drive
• 3 steps

Flags

Missing Prerequisites

This guide is missing information on how to start the process. Make a prerequisite guide!

• BackSamsung Series 9 NP900X4B-A02

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              SSD Hard Drive               

• Before begining you must remove the back panel of the laptop. The Battery Removal guide demonstrates how to do this. The link to this guide is posed here. Samsung NP900X4B Battery Replacement
• Once this is completed, use this image to locate the Hard Drive. It can be found in the upper left hand corner of the device.

Before begining you must remove the back panel of the laptop. The Battery Removal guide demonstrates how to do this. The link to this guide is posed here. Samsung NP900X4B Battery Replacement

Once this is completed, use this image to locate the Hard Drive. It can be found in the upper left hand corner of the device.

1024

Step 2

• Remove the two 2.5mm Phillips #000 screws at the top of the SSD.

Remove the two 2.5mm Phillips #000 screws at the top of the SSD.

Step 3

• Gently lift up from the top of the SSD card using a plastic opening tool.
• Pull gently away from the drive slot located at the base of the SSD.
• After removing the SSD memory chip, carefully insert the new SSD into the old slot. When completed, reinsert the two screws. Then, slowly remove the heat tape from the old SSD and apply to the new SSD.

Gently lift up from the top of the SSD card using a plastic opening tool.

Pull gently away from the drive slot located at the base of the SSD.

After removing the SSD memory chip, carefully insert the new SSD into the old slot. When completed, reinsert the two screws. Then, slowly remove the heat tape from the old SSD and apply to the new SSD.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Bryton Lawrence                     

Member since: 10/17/2018

309 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       UMass Dartmouth, Team S4-G6, Valliere Fall 2018                        

                                                  Member of UMass Dartmouth, Team S4-G6, Valliere Fall 2018 



                    UMASSD-VALLIERE-F18S4G6                     


                                            5 Members                     


                                            6 Guides authored                     

Sovfree - Dec 12, 2021

Reply

Excellent instruction. Thank you!