Difficulty

Moderate

Steps

5

Time Required

                          10 - 20 minutes

Sections

1

  • Wifi Card
  • 5 steps

Flags

Missing Prerequisites

This guide is missing information on how to start the process. Make a prerequisite guide!

  • BackSamsung Series 9 NP900X4B-A02

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Wifi Card
  • This guide should be attempted after the removal of the back panel is completed.
  • The Battery Removal guide demonstrates how to do this. The link to this guide is posed here. Samsung NP900X4B Battery Replacement

This guide should be attempted after the removal of the back panel is completed.

The Battery Removal guide demonstrates how to do this. The link to this guide is posed here. Samsung NP900X4B Battery Replacement

1024

Step 2

  • In order to continue, you need to observe the inside of the laptop and find where the Wifi Card is located.

In order to continue, you need to observe the inside of the laptop and find where the Wifi Card is located.

Step 3

  • After finding the Wifi Card, you will discover two more 2.5mm Phillips #00 screws which hold the card in place.
  • The screws locations are shown in the image.
  • The same bit piece will be used to unscrew these (PH00/PH000). After completing this continue to the next step.

After finding the Wifi Card, you will discover two more 2.5mm Phillips #00 screws which hold the card in place.

The screws locations are shown in the image.

The same bit piece will be used to unscrew these (PH00/PH000). After completing this continue to the next step.

Step 4

  • There will be two wires connecting to the Wifi Card from the laptop.
  • These wires can be removed with one of the plastic tools in the iFixit toolkit by applying slight force onto them.
  • After removing the wires move on to the next step.

There will be two wires connecting to the Wifi Card from the laptop.

These wires can be removed with one of the plastic tools in the iFixit toolkit by applying slight force onto them.

After removing the wires move on to the next step.

Step 5

  • This last step is the easiest of them all, all you need to do it pick up the Wifi Card from its position and you’re done!
  • Now you are able to replace the card by following these steps in reverse or have the card further repaired.

This last step is the easiest of them all, all you need to do it pick up the Wifi Card from its position and you’re done!

Now you are able to replace the card by following these steps in reverse or have the card further repaired.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Jacob Drohan

Member since: 10/15/2018

121 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       UMass Dartmouth, Team S4-G6, Valliere Fall 2018                        

                                                  Member of UMass Dartmouth, Team S4-G6, Valliere Fall 2018 



                    UMASSD-VALLIERE-F18S4G6                     


                                            5 Members                     


                                            6 Guides authored