Difficulty

Moderate

Steps

9

Time Required

Suggest a time??

Sections

2

  • Battery
  • 2 steps
  • Front Case
  • 7 steps

Flags

0

  • BackSamsung NX Mini

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Orient the camera so the button panel and LCD are facing you.
  • Use a spudger or fingernail to open the battery compartment on the right side of the camera.

Orient the camera so the button panel and LCD are facing you.

Use a spudger or fingernail to open the battery compartment on the right side of the camera.

1024

Step 2

  • Push the blue trapdoor to the left to release the battery, and remove the battery.
  • There is no battery shown in this photo.

Push the blue trapdoor to the left to release the battery, and remove the battery.

There is no battery shown in this photo.

Step 3

              Front Case
  • Use a Phillips #00 screwdriver to remove the 4 mm screw inside the battery compartment.

Use a Phillips #00 screwdriver to remove the 4 mm screw inside the battery compartment.

Step 4

  • Remove the 4 mm Phillips #00 screw hiding in the external flash port.

Remove the 4 mm Phillips #00 screw hiding in the external flash port.

Step 5

  • Remove the four 5 mm Phillips #00 screws from the lens assembly.

Remove the four 5 mm Phillips #00 screws from the lens assembly.

Step 6

  • Remove the metal lens mount by hand or with tweezers.
  • Be careful not to touch the sensor in the center of the lens assembly.

Remove the metal lens mount by hand or with tweezers.

Be careful not to touch the sensor in the center of the lens assembly.

Step 7

  • Use tweezers to remove the inner metal ring.

Use tweezers to remove the inner metal ring.

Step 8

  • Use a Phillips #00 screwdriver to remove the three 4 mm screws from the bottom of the case.

Use a Phillips #00 screwdriver to remove the three 4 mm screws from the bottom of the case.

Step 9

  • Use your hands to slowly pull the front casing away from the camera.
  • The case is attached with multiple clips that may make a cracking noise as you pull it away from the camera.

Use your hands to slowly pull the front casing away from the camera.

The case is attached with multiple clips that may make a cracking noise as you pull it away from the camera.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Kelsea Weber

Member since: 11/12/2015

18,948 Reputation

                                      32 Guides authored                  



                       Badges:
                       47







                                                        +44 more badges

Team

                       iFixit                        

                                                  Member of iFixit 



                    Community                     


                                            141 Members                     


                                            15,767 Guides authored