Samsung Nx2000 Motherboard Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

Suggest a time??

Sections

1

• Motherboard
• 5 steps

Flags

0

• BackSamsung NX2000

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Motherboard               

• Remove the 4mm Y0 screws found on the sides and bottom of the camera.

Remove the 4mm Y0 screws found on the sides and bottom of the camera.

1024

Step 2

• Use a plastic opening tool to pry the back cover (with LCD screen) away from the front of the camera.
• Use a plastic opening tool to disconnect the LCD ribbon cable holding the two pieces of the camera together.

Use a plastic opening tool to pry the back cover (with LCD screen) away from the front of the camera.

Use a plastic opening tool to disconnect the LCD ribbon cable holding the two pieces of the camera together.

Step 3

• Move towards the main frame of the camera and locate the three 1mm Y0 screws holding down the motherboard.

Move towards the main frame of the camera and locate the three 1mm Y0 screws holding down the motherboard.

Step 4

• Lift the duct tape covering the ribbon cable connectors.
• Use a plastic opening tool to lift the black tab on top of the ZIF connectors.
• Pull all five ribbon cables out with tweezers.

Lift the duct tape covering the ribbon cable connectors.

Use a plastic opening tool to lift the black tab on top of the ZIF connectors.

Pull all five ribbon cables out with tweezers.

Step 5

• Take the time to make sure everything is detached and lift the motherboard slowly using your fingers.

Take the time to make sure everything is detached and lift the motherboard slowly using your fingers.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 4 other contributors 

                    Delmis Gomez                     

Member since: 02/09/2016

125 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       USF Tampa, Team 7-4, Cheng Spring 2016                        

                                                  Member of USF Tampa, Team 7-4, Cheng Spring 2016 



                    USFT-CHENG-S16S7G4                     


                                            4 Members                     


                                            10 Guides authored                     

Rinaldo Eversdijk - Oct 11, 2019

Reply

The step for removing the metal hot shoe lit and removing 2 small screws is missing.

This is also required in order to be able to remove the back cover.

The step removing the metal hot shoe lit and removing 2 small screws underneath is missing.

This is required in order to be able to remove the back cover.

my_legacy_lethal_infected - Jan 31, 2022

Reply

The camera is simply dead from one day to the next it stopped working, what could it be?

Gabriel Fernandes Guimaraes - Dec 25, 2022

Aqui a mesma coisa, do nada, quando liga a câmera o LED Verde fica parado e em seguida pisca alternadamente, ESTÁ NOVISSIMA, nunca sofreu quedas ou qualquer outro tipo de avaria