Samsung Nx30 Flash Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

Suggest a time??

Sections

Battery
3 steps
Flash
6 steps

Flags

BackSamsung NX30
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Flip the camera over so that the bottom of the camera is up.
Push the battery switch towards the back of the camera.

Flip the camera over so that the bottom of the camera is up.

Push the battery switch towards the back of the camera.

1024

Step 2

Locate the blue switch above the battery pack.
Slide the blue switch into the camera in the direction of the arrow on the switch. When the switch has been pushed in the battery will spring up.

Locate the blue switch above the battery pack.

Slide the blue switch into the camera in the direction of the arrow on the switch. When the switch has been pushed in the battery will spring up.

Step 3

Pull the battery out.

Pull the battery out.

Step 4

              Flash

If you are looking at the front of the camera with the lens facing you, look at the right side of the camera, press the flash button to pop up the flash head.

If you are looking at the front of the camera with the lens facing you, look at the right side of the camera, press the flash button to pop up the flash head.

Step 5

Once the flash head is up, unscrew the two black 4mm Phillips head screws located on either side of the flash bulb.

Once the flash head is up, unscrew the two black 4mm Phillips head screws located on either side of the flash bulb.

Step 6

Once the screws have been removed, push the flash head back down.

Once the screws have been removed, push the flash head back down.

Step 7

After closing the flash head, pull the black flash head cover up and off of the flash head.

After closing the flash head, pull the black flash head cover up and off of the flash head.

Step 8

Once the flash cover has been removed, unscrew the two silver 3mm Phillips head screws located on the top of the flash head.
Do not touch the metal leads on either side of the flash, and avoid touching any metal. The capacitor may be charged and it will shock you.

Once the flash cover has been removed, unscrew the two silver 3mm Phillips head screws located on the top of the flash head.

Do not touch the metal leads on either side of the flash, and avoid touching any metal. The capacitor may be charged and it will shock you.

Step 9

Once the screws have been removed, pull the flash bulb out from the camera.
Then remove the flash from the camera by soldering the flash bulb off, using a soldering iron.
For tips on soldering, check out the Soldering Technique Guide.

Once the screws have been removed, pull the flash bulb out from the camera.

Then remove the flash from the camera by soldering the flash bulb off, using a soldering iron.

For tips on soldering, check out the Soldering Technique Guide.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors

                    William

Member since: 02/03/2016

179 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       UW Tacoma, Team 1-4, Rose Winter 2016                        

                                                  Member of UW Tacoma, Team 1-4, Rose Winter 2016 



                    UWT-ROSE-W16S1G4                     


                                            4 Members                     


                                            10 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team