Samsung Nx300 And Nx300M Back Panel Assembly Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          5 - 10 minutes

Sections

Back Panel Assembly
4 steps

Flags

BackSamsung NX300 and NX300M
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Unscrew the Back Panel

Using a Phillips #00 precision screwdriver, remove the seven 4mm screws (5 on the bottom of the device and 1 on each of the two sides) holding the back panel to the camera.
On the NX300M model, there is an additional screw under the text AMOLED behind display which should be removed before detaching the back panel of the camera.

Using a Phillips #00 precision screwdriver, remove the seven 4mm screws (5 on the bottom of the device and 1 on each of the two sides) holding the back panel to the camera.

On the NX300M model, there is an additional screw under the text AMOLED behind display which should be removed before detaching the back panel of the camera.

1024

Step 2

              Remove the Input Port Screw

Using a Phillips #00 precision screwdriver, remove the last 4 mm screw located inside the input ports’ compartment.

Using a Phillips #00 precision screwdriver, remove the last 4 mm screw located inside the input ports’ compartment.

Step 3

              Open the Camera Casing

Place a plastic opening tool into the gap between the back panel and camera body, from both the top and the bottom of camera. Carefully pry open the camera and separate the back panel.

Place a plastic opening tool into the gap between the back panel and camera body, from both the top and the bottom of camera. Carefully pry open the camera and separate the back panel.

Step 4

              Remove the Back Panel

Using tweezers or your fingers, pull the display’s black ribbon from the motherboard. This frees the back panel altogether.
To safely remove ribbons, you would need to first unlock the holding mechanism by lifting up the black strip atop the ribbon adapter.

Using tweezers or your fingers, pull the display’s black ribbon from the motherboard. This frees the back panel altogether.

To safely remove ribbons, you would need to first unlock the holding mechanism by lifting up the black strip atop the ribbon adapter.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      11 other people completed this guide.

Author

                                      with 10 other contributors

                    Andres Perez

Member since: 01/21/2015

951 Reputation

                                      5 Guides authored                  



                       Badges:
                       15







                                                        +12 more badges

Team

                       USF Tampa, Team 9-6, Blackwell Winter 2015                        

                                                  Member of USF Tampa, Team 9-6, Blackwell Winter 2015 



                    USFT-BLACKWELL-W15S9G6                     


                                            4 Members                     


                                            10 Guides authored

Amanda Aiken - Apr 18, 2017

I had to replace the back panel when my amoled screen started going bad. Thanks for a great tutorial!

Norbert - Ciprian Patras - Jun 22, 2022

Hello, can anybody tell me if the display of SAMSUNG NX 300 M match to a SAMSUNG NX 300 ? I need to replace the display of NX 300 and i dont find any pieces but i found an NX 300 M

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team