Difficulty
Moderate
Steps
4
Time Required
Suggest a time??
Sections
2
- Battery
- 1 step
- Lens Assembly
- 3 steps
Flags
0
BackSamsung NX3000
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
We highly suggest you use a magnetic project mat or an organization tray. This camera has many different types of screws and keeping them organized is key to proper reassembly.
What you need
Step 1
Battery
- If you haven’t done so already, remove the lens from the camera.
- Turn the camera upside down.
- Slide the button to the left to open the battery compartment.
- Push the blue button up to release the battery.
- The battery is not shown in these photos.
If you haven’t done so already, remove the lens from the camera.
Turn the camera upside down.
Slide the button to the left to open the battery compartment.
Push the blue button up to release the battery.
The battery is not shown in these photos.
1024
Step 2
Lens Assembly
- Remove the four 7.3 mm Phillips screws from the front of the lens assembly.
- Remove the silver ring with tweezers.
Remove the four 7.3 mm Phillips screws from the front of the lens assembly.
Remove the silver ring with tweezers.
Step 3
- Use tweezers to remove the black plastic ring and small metal ring inside the lens assembly.
Use tweezers to remove the black plastic ring and small metal ring inside the lens assembly.
Step 4
- Use tweezers to lift the pyramid screw and spring from the lens assembly.
Use tweezers to lift the pyramid screw and spring from the lens assembly.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
Kelsea Weber
Member since: 11/12/2015
18,948 Reputation
32 Guides authored
Badges:
47
+44 more badges
Team
iFixit
Member of iFixit
Community
141 Members
15,767 Guides authored
