Samsung Odyssey Np800G5M Speaker Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          15 minutes

Sections

Battery
4 steps
Speaker
4 steps

Flags

BackSamsung Odyssey NP800G5M
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Remove the eleven 6.6 mm screws on the back of the computer using the Phillips #0 screwdriver.

Remove the eleven 6.6 mm screws on the back of the computer using the Phillips #0 screwdriver.

1024

Step 2

Using the opening tool, gently pry apart the back corners until the plastic separates from the body of the laptop.
Work your way around the body of the laptop until the back cover is completely separated.
Remove the back casing.

Using the opening tool, gently pry apart the back corners until the plastic separates from the body of the laptop.

Work your way around the body of the laptop until the back cover is completely separated.

Remove the back casing.

Step 3

Disconnect the battery connector cable.
Working on the device without removing the battery connector cable can damage major components of the device.

Disconnect the battery connector cable.

Working on the device without removing the battery connector cable can damage major components of the device.

Step 4

Remove the four 6.6 mm screws using the Phillips #0 screwdriver.
Remove the battery from the device.

Remove the four 6.6 mm screws using the Phillips #0 screwdriver.

Remove the battery from the device.

Step 5

              Speaker

Using the spudger, lift the black tab to release the ribbon cable.
Disconnect the USB ribbon cable.

Using the spudger, lift the black tab to release the ribbon cable.

Disconnect the USB ribbon cable.

Step 6

Remove the tape securing the wire down.
This tape will remain sticky after removal.

Remove the tape securing the wire down.

This tape will remain sticky after removal.

Step 7

Disconnect the speakers by pulling the plugs out of their sockets.

Disconnect the speakers by pulling the plugs out of their sockets.

Step 8

Using the Phillips #0 screwdriver, remove the four screws holding the speakers to device.
Remove the speakers from the device.

Using the Phillips #0 screwdriver, remove the four screws holding the speakers to device.

Remove the speakers from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 3 other contributors

                    Sean Surrency

Member since: 09/16/2019

765 Reputation

                                      5 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Embry-Riddle Aeronautical University, Team S24-G6, McClure Fall 2019                        

                                                  Member of Embry-Riddle Aeronautical University, Team S24-G6, McClure Fall 2019 



                    ERAU-MCCLURE-F19S24G6                     


                                            4 Members                     


                                            5 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team