Samsung P241 Front Panel Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          5 minutes

Sections

Top Case
2 steps
Front Panel
4 steps

Flags

BackSamsung P241
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Top Case

You will need to be near a power source for this guide.
With the back of the DVD player facing you, remove the three 1 cm black screws on the right, left, and top sides using a Phillips #1 screwdriver.

You will need to be near a power source for this guide.

With the back of the DVD player facing you, remove the three 1 cm black screws on the right, left, and top sides using a Phillips #1 screwdriver.

1024

Step 2

Pull the top cover towards you until you can lift it up and off.

Pull the top cover towards you until you can lift it up and off.

Step 3

              Front Panel

With the front of the DVD player facing you, turn the power on and eject the disc tray.
Press down on the disc tray with your thumbs while also pressing up with your pointer finger on the left and right edges of the silver cover. The cover should easily pop up and off the disc tray.
Be careful not to crack or bend the disc tray by pulling too hard.

With the front of the DVD player facing you, turn the power on and eject the disc tray.

Press down on the disc tray with your thumbs while also pressing up with your pointer finger on the left and right edges of the silver cover. The cover should easily pop up and off the disc tray.

Be careful not to crack or bend the disc tray by pulling too hard.

Step 4

To remove the front panel, lift up the clips on the bottom, left and right sides of the DVD player.
Be sure to have all clips lifted up at the same time otherwise it will be difficult to get the panel off.
If you are having trouble removing the panel, try wedging an object underneath the two clips on the bottom to keep them from falling back into place.

To remove the front panel, lift up the clips on the bottom, left and right sides of the DVD player.

Be sure to have all clips lifted up at the same time otherwise it will be difficult to get the panel off.

If you are having trouble removing the panel, try wedging an object underneath the two clips on the bottom to keep them from falling back into place.

Step 5

Gently remove the front panel by pulling it forward.

Gently remove the front panel by pulling it forward.

Step 6

Press the eject button again to make the disc tray slide back into place.
Turn off the DVD player and unplug it from the wall before proceeding to further steps.

Press the eject button again to make the disc tray slide back into place.

Turn off the DVD player and unplug it from the wall before proceeding to further steps.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors

                    Sarah Wachtfogel

Member since: 01/12/2011

340 Reputation

                                      3 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Cal Poly, Team 14-7, Forte Winter 2011                        

                                                  Member of Cal Poly, Team 14-7, Forte Winter 2011 



                    CPSU-FORTE-W11S14G7                     


                                            5 Members                     


                                            7 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team