Difficulty

Moderate

Steps

13

Time Required

Suggest a time??

Sections

1

  • Motherboard
  • 13 steps

Flags

4

Confusing Text

Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

Step Trimmer

This guide has unnecessary steps. Trim them to be more concise!

  • BackSamsung PL200

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Motherboard
  • Remove the two 3mm black external scews from he camera’s side using the #000 Philips Screwdriver.
  • Remove the five 3mm silver external screws from the camera’s side and bottom using the #000 Philips Screwdriver

Remove the two 3mm black external scews from he camera’s side using the #000 Philips Screwdriver.

Remove the five 3mm silver external screws from the camera’s side and bottom using the #000 Philips Screwdriver

1024

Step 2

  • Use the Plastic Opening Tool and your finger to pry off and remove the external cover.

Use the Plastic Opening Tool and your finger to pry off and remove the external cover.

Step 3

  • Remove the 3mm screw holding the circuit board using the #000 Philips Screwdriver.
  • Remove any tape on the circuit board and screen.
  • Using Tweezers, unplug the wires from the circuit board and remove it.

Remove the 3mm screw holding the circuit board using the #000 Philips Screwdriver.

Remove any tape on the circuit board and screen.

Using Tweezers, unplug the wires from the circuit board and remove it.

Step 4

  • Flip the LCD screen forward and remove the two 3mm screws beneath it using the #000 Phillips Screwdriver.
  • Remove the metal brace using the Plastic Opening Tool.

Flip the LCD screen forward and remove the two 3mm screws beneath it using the #000 Phillips Screwdriver.

Remove the metal brace using the Plastic Opening Tool.

Step 5

  • Lift the black latch where the screen plugs into the motherboard and pull the cord to remove the screen
  • Separate the screen and the metal brace from the camera body.

Lift the black latch where the screen plugs into the motherboard and pull the cord to remove the screen

Separate the screen and the metal brace from the camera body.

Step 6

  • Remove the front cover of the camera using your fingers and the Plastic Opening Tool.

Remove the front cover of the camera using your fingers and the Plastic Opening Tool.

Step 7

  • Set the screen and metal brace aside
  • Open the camera’s battery cover.

Set the screen and metal brace aside

Open the camera’s battery cover.

Step 8

  • Using the #000 Phillips Screwdriver, remove the two 3mm screws holding the motherboard in place.
  • There may be tape still on the motherboard, if so, remove it.

Using the #000 Phillips Screwdriver, remove the two 3mm screws holding the motherboard in place.

There may be tape still on the motherboard, if so, remove it.

Step 9

  • Use the Tweezers to remove the tape from bottom of the camera
  • Use the Tweezers to disconnect the lens unit cord that is at the bottom of the camera from the motherboard.
  • Remove the last 3mm screw that holds the motherboard in place.

Use the Tweezers to remove the tape from bottom of the camera

Use the Tweezers to disconnect the lens unit cord that is at the bottom of the camera from the motherboard.

Remove the last 3mm screw that holds the motherboard in place.

Step 10

  • Use the Tweezers to unplug the small lens unit cord from the camera frame on the back side of the camera.
  • Gently lift the lens unit from the frame.
  • Separate the lens unit, motherboard, and camera.

Use the Tweezers to unplug the small lens unit cord from the camera frame on the back side of the camera.

Gently lift the lens unit from the frame.

Separate the lens unit, motherboard, and camera.

Step 11

  • Use the Tweezers to remove the small cord from motherboard.
  • Use the Tweezers to remove the first large lens unit cord from the motherboard.
  • Use the Tweezers to remove the second large lens unit cord from the motherboard.

Use the Tweezers to remove the small cord from motherboard.

Use the Tweezers to remove the first large lens unit cord from the motherboard.

Use the Tweezers to remove the second large lens unit cord from the motherboard.

Step 12

  • Desolder the four wires from the old motherboard.

Desolder the four wires from the old motherboard.

Step 13

  • Last, solder on a functional motherboard at this stage and reassemble the device.

Last, solder on a functional motherboard at this stage and reassemble the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Marcus Lee

Member since: 01/29/2015

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       Clemson, Team 15-7, Shirley Winter 2015                        

                                                  Member of Clemson, Team 15-7, Shirley Winter 2015 



                    CLEM-SHIRLEY-W15S15G7                     


                                            5 Members                     


                                            9 Guides authored