Samsung Radiant360 R3 Wireless Setup Button And Usb Module Replacement Repair Guide

Difficulty

Easy

Steps

5

Time Required

                          10 - 15 minutes            

Sections

1

• Wireless Setup Button and USB Module
• 5 steps

Flags

0

• BackSamsung Radiant360 R3

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Wireless Setup Button and USB Module               

• Flip the device so that the bottom of the device is facing you. Remove these feet with a pair of tweezers.
• Remove the four 10mm long screws with the Phillips #1 screwdriver.

Flip the device so that the bottom of the device is facing you. Remove these feet with a pair of tweezers.

Remove the four 10mm long screws with the Phillips #1 screwdriver.

1024

Step 2

• Remove the bottom shell from the speaker.

Remove the bottom shell from the speaker.

Step 3

• Remove the connector from the board by pressing down on the center tab while nudging the connector away with a spudger.
• Be careful not to pull directly on the wires or apply too much pressure, or you risk breaking the connector.

Remove the connector from the board by pressing down on the center tab while nudging the connector away with a spudger.

Be careful not to pull directly on the wires or apply too much pressure, or you risk breaking the connector.

Step 4

• Remove the two 10mm long screws from the board utilizing the Phillips #1 screwdriver.

Remove the two 10mm long screws from the board utilizing the Phillips #1 screwdriver.

Step 5

• Use a spudger to press the plastic tab away from the board until the board pops up.
• Remove the board with the USB module from the device.

Use a spudger to press the plastic tab away from the board until the board pops up.

Remove the board with the USB module from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 5 other contributors 

                    Fadi Alzammar                     

Member since: 04/22/2018

782 Reputation

                                      5 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       Cal Poly, Team S25-G18, Maness Spring 2018                        

                                                  Member of Cal Poly, Team S25-G18, Maness Spring 2018 



                    CPSU-MANESS-S18S25G18                     


                                            4 Members                     


                                            5 Guides authored