Difficulty
Moderate
Steps
5
Time Required
8 - 15 minutes
Sections
3
- Battery
- 2 steps
- Back Panel
- 1 step
- RAM
- 2 steps
Flags
0
BackSamsung RC512
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Place the laptop upside down.
Place the laptop upside down.
1024
Step 2
- Locate two notches above the battery.
- Slide both battery locking notches to either side to remove the battery.
- Pull the battery out.
Locate two notches above the battery.
Slide both battery locking notches to either side to remove the battery.
Pull the battery out.
Step 3
Back Panel
- Using the Phillips #0 screwdriver, unscrew the one 5mm screw.
- Using the blue plastic opening tools, wedge one in between the back panel and the laptop.
- Carefully remove the back panel..
Using the Phillips #0 screwdriver, unscrew the one 5mm screw.
Using the blue plastic opening tools, wedge one in between the back panel and the laptop.
Carefully remove the back panel..
Step 4
RAM
- Slide the hinges outwards to release the RAM.
- RAM will pop up by itself. If not, lift the RAM up to about 45 degrees.
Slide the hinges outwards to release the RAM.
RAM will pop up by itself. If not, lift the RAM up to about 45 degrees.
Step 5
- Carefully slide the RAM away from the slot to remove it.
- Repeat step 4 to remove another RAM.
Carefully slide the RAM away from the slot to remove it.
Repeat step 4 to remove another RAM.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Juri Ando
Member since: 09/15/2016
896 Reputation
8 Guides authored
Badges:
14
+11 more badges
Team
USF Tampa, Team 18-2, Blackwell Fall 2016
Member of USF Tampa, Team 18-2, Blackwell Fall 2016
USFT-BLACKWELL-F16S18G2
4 Members
8 Guides authored