Difficulty

Moderate

Steps

6

Time Required

                          30 minutes            

Sections

2

  • Battery
  • 2 steps
  • LCD Screen
  • 4 steps

Flags

0

  • BackSamsung S760

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery               
  • Placing your thumb on the battery cover, push outwards, away from the camera in the direction the arrow is pointing. If done correctly when it’s completely unhooked, the latch will open.

Placing your thumb on the battery cover, push outwards, away from the camera in the direction the arrow is pointing. If done correctly when it’s completely unhooked, the latch will open.

1024

Step 2

  • Tip the camera as to gently slide the batteries out of the camera.

Tip the camera as to gently slide the batteries out of the camera.

Step 3

              LCD Screen               
  • Locate and remove the six 4mm screws on the sides of the camera, using the Phillip Screwdriver #000 bit.
  • Screw dimensions refer to screw lengths.

Locate and remove the six 4mm screws on the sides of the camera, using the Phillip Screwdriver #000 bit.

Screw dimensions refer to screw lengths.

Step 4

  • Use the plastic opening tool to open pry open the back case, following alongside the edge of the case if need be.

Use the plastic opening tool to open pry open the back case, following alongside the edge of the case if need be.

Step 5

  • Under the LCD screen, remove the metal plate by removing the two 3mm screws holding it in place.

Under the LCD screen, remove the metal plate by removing the two 3mm screws holding it in place.

Step 6

  • Use the plastic opening tool to gently lift the small gray clip covering the ribbon cable connection.
  • Carefully pull out the ribbon cable.

Use the plastic opening tool to gently lift the small gray clip covering the ribbon cable connection.

Carefully pull out the ribbon cable.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 3 other contributors 

                    Isaiah Weidmann                     

Member since: 03/04/2017

279 Reputation

                                      2 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       UMass Dartmouth, Team S8-G1, Catania Spring 2017                        

                                                  Member of UMass Dartmouth, Team S8-G1, Catania Spring 2017 



                    UMASSD-CATANIA-S17S8G1                     


                                            3 Members                     


                                            11 Guides authored