Difficulty
Moderate
Steps
5
Time Required
15 - 20 minutes
Sections
1
- Lens
- 5 steps
Flags
0
BackSamsung SC-MX20
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
When the lens of a Samsung camcorder are damaged or non-functional, it would need to be replaced. This guide will show you how to remove the lens in your camcorder.
What you need
Step 1
Lens
- Unscrew the eight 4mm screws using the Phillips #000 screwdriver.
Unscrew the eight 4mm screws using the Phillips #000 screwdriver.
1024
Step 2
- Unplug the cord connecting the LCD section of the device.
- Remove the left face of the device.
- Remove the top face by removing the three 4mm screws using a Phillips #000 screwdriver.
Unplug the cord connecting the LCD section of the device.
Remove the left face of the device.
Remove the top face by removing the three 4mm screws using a Phillips #000 screwdriver.
Step 3
- After removing the body of the device, unscrew the two 3.5mm Phillips #000 screws holding the battery compartment in place.
- Remove the battery compartment.
After removing the body of the device, unscrew the two 3.5mm Phillips #000 screws holding the battery compartment in place.
Remove the battery compartment.
Step 4
- Remove the lens assembly from the device.
Remove the lens assembly from the device.
Step 5
- Remove the three 3.5mm Phillips #000 screws on the metal part from the lens component.
- Remove the motherboard from the lens.
- Remove the lens from the lens assembly.
Remove the three 3.5mm Phillips #000 screws on the metal part from the lens component.
Remove the motherboard from the lens.
Remove the lens from the lens assembly.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Austin Williams
Member since: 09/24/2019
171 Reputation
1 Guide authored
Badges:
3
Team
Embry-Riddle Aeronautical University, Team S15-G1, Lamothe Fall 2019
Member of Embry-Riddle Aeronautical University, Team S15-G1, Lamothe Fall 2019
ERAU-LAMOTHE-F19S15G1
4 Members
4 Guides authored