Difficulty
Moderate
Steps
4
Time Required
8 minutes
Sections
1
- Cover
- 4 steps
Flags
0
BackSamsung SCV-VLUUST50
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Cover
- Unscrew all visible screws indicated by red circles with a #00 Phillips driver.
- Slide memory card cover and unscrew hidden screw underneath with a #00 Phillips driver.
Unscrew all visible screws indicated by red circles with a #00 Phillips driver.
Slide memory card cover and unscrew hidden screw underneath with a #00 Phillips driver.
1024
Step 2
- Remove the flat side panel by applying gentle pressure toward the bottom of the camera.
- Remove the corner panel by applying pressure away from the shutter button.
- The memory card cover will come off with the corner panel.
- Remove the top panel by applying gentle pressure away from the shutter button.
Remove the flat side panel by applying gentle pressure toward the bottom of the camera.
Remove the corner panel by applying pressure away from the shutter button.
The memory card cover will come off with the corner panel.
Remove the top panel by applying gentle pressure away from the shutter button.
Step 3
- Remove screws beneath the top panel indicated by red circles with a #00 Phillips driver.
Remove screws beneath the top panel indicated by red circles with a #00 Phillips driver.
Step 4
- Remove the front and back covers by pulling them straight apart.
Remove the front and back covers by pulling them straight apart.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Jade Withrow
Member since: 02/08/2018
255 Reputation
2 Guides authored
Badges:
4
+1 more badge
Team
University of North Texas, Team S6-G2, Thomas Spring 2018
Member of University of North Texas, Team S6-G2, Thomas Spring 2018
UNT-THOMAS-S18S6G2
4 Members
12 Guides authored