Samsung Scv Vluust50 Shutter Button Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          5 minutes            

Sections

2

• Cover
• 4 steps
• Shutter Button
• 1 step

Flags

0

• BackSamsung SCV-VLUUST50

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Cover               

• Unscrew all visible screws indicated by red circles with a #00 Phillips driver.
• Slide memory card cover and unscrew hidden screw underneath with a #00 Phillips driver.

Unscrew all visible screws indicated by red circles with a #00 Phillips driver.

Slide memory card cover and unscrew hidden screw underneath with a #00 Phillips driver.

1024

Step 2

• Remove the flat side panel by applying gentle pressure toward the bottom of the camera.
• Remove the corner panel by applying pressure away from the shutter button.
• The memory card cover will come off with the corner panel.
• Remove the top panel by applying gentle pressure away from the shutter button.

Remove the flat side panel by applying gentle pressure toward the bottom of the camera.

Remove the corner panel by applying pressure away from the shutter button.

The memory card cover will come off with the corner panel.

Remove the top panel by applying gentle pressure away from the shutter button.

Step 3

• Remove screws beneath the top panel indicated by red circles with a #00 Phillips driver.

Remove screws beneath the top panel indicated by red circles with a #00 Phillips driver.

Step 4

• Remove the front and back covers by pulling them straight apart.

Remove the front and back covers by pulling them straight apart.

Step 5

              Shutter Button               

• Remove the screw below the shutter button with a Phillips #000 screw driver.
• Once the screw is removed the shutter button should easily come off, and you can replace it with the new button.

Remove the screw below the shutter button with a Phillips #000 screw driver.

Once the screw is removed the shutter button should easily come off, and you can replace it with the new button.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Jaeda Ransom                     

Member since: 02/13/2018

123 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       University of North Texas, Team S6-G2, Thomas Spring 2018                        

                                                  Member of University of North Texas, Team S6-G2, Thomas Spring 2018 



                    UNT-THOMAS-S18S6G2                     


                                            4 Members                     


                                            12 Guides authored