Samsung Series 5 Ultrabook Speakers Replacement Repair Guide

Difficulty

Moderate

Steps

7

Time Required

                          10 minutes            

Sections

1

• Battery
• 7 steps

Flags

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

• BackSamsung Series 5 UltraTouch NP540U3C

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Remove the Screws on the Back Cover               

• Power off the device. Remove the remaining screws holding the back cover in place:
• Six 4.0 mm Phillips #00 screws.
• Seven 6.7 mm Phillips #00 screws.

Power off the device. Remove the remaining screws holding the back cover in place:

Six 4.0 mm Phillips #00 screws.

Seven 6.7 mm Phillips #00 screws.

1024

Step 2

              Remove the Rubber Pads               

• Remove the two rubber pads concealing the final bottom case screws.
• Remove the two 4 mm Phillips #00 screws found under these pads.

Remove the two rubber pads concealing the final bottom case screws.

Remove the two 4 mm Phillips #00 screws found under these pads.

Step 3

              Remove the Back Cover               

• There are clips along the edges of the back cover that hold it in place. Be careful not to break these.
• Remove the entire rest of the back cover.

There are clips along the edges of the back cover that hold it in place. Be careful not to break these.

Remove the entire rest of the back cover.

Step 4

• Remove the tape holding the wires in place.

Remove the tape holding the wires in place.

Step 5

• Remove the following Phillips 00 screws securing the battery:
• Four 4.5 mm screws
• Two 6.7 mm Phillips screws

Remove the following Phillips 00 screws securing the battery:

Four 4.5 mm screws

Two 6.7 mm Phillips screws

Step 6

              Remove the Battery               

• Pull the battery connector towards the battery to disconnect it.

Pull the battery connector towards the battery to disconnect it.

Step 7

• Remove the battery from the laptop.

Remove the battery from the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 

                    Javier Jimenez                     

Member since: 11/04/2019

223 Reputation

                                      2 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       IUPUI, Team S1-G6, Harley Fall 2019                        

                                                  Member of IUPUI, Team S1-G6, Harley Fall 2019 



                    IUPUI-HARLEY-F19S1G6                     


                                            3 Members                     


                                            2 Guides authored                     

Rodrigo Melo - Jan 31, 2021

Reply

And about removing speakers?