Samsung Series 5 Ultratouch Battery Replacement Repair Guide

Difficulty

Easy

Steps

7

Time Required

                          30 minutes            

Sections

1

• Battery
• 7 steps

Flags

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

• BackSamsung Series 5 UltraTouch NP540U3C

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Remove the Screws on the Back Cover               

• Power off the device. Remove the remaining screws holding the back cover in place:
• Six 4.0 mm Phillips #00 screws.
• Seven 6.7 mm Phillips #00 screws.

Power off the device. Remove the remaining screws holding the back cover in place:

Six 4.0 mm Phillips #00 screws.

Seven 6.7 mm Phillips #00 screws.

1024

Step 2

              Remove the Rubber Pads               

• Remove the two rubber pads concealing the final bottom case screws.
• Remove the two 4 mm Phillips #00 screws found under these pads.

Remove the two rubber pads concealing the final bottom case screws.

Remove the two 4 mm Phillips #00 screws found under these pads.

Step 3

              Remove the Back Cover               

• There are clips along the edges of the back cover that hold it in place. Be careful not to break these.
• Remove the entire rest of the back cover.

There are clips along the edges of the back cover that hold it in place. Be careful not to break these.

Remove the entire rest of the back cover.

Step 4

• Remove the tape holding the wires in place.

Remove the tape holding the wires in place.

Step 5

• Remove the following Phillips 00 screws securing the battery:
• Four 4.5 mm screws
• Two 6.7 mm Phillips screws

Remove the following Phillips 00 screws securing the battery:

Four 4.5 mm screws

Two 6.7 mm Phillips screws

Step 6

              Remove the Battery               

• Pull the battery connector towards the battery to disconnect it.

Pull the battery connector towards the battery to disconnect it.

Step 7

• Remove the battery from the laptop.

Remove the battery from the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      13 other people completed this guide.                                             

Author

                                      with 11 other contributors 

                    Timothy                     

Member since: 01/30/2015

1,564 Reputation

                                      5 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges                           

Team

                       USF Tampa, Team 16-3, Watkins Winter 2015                        

                                                  Member of USF Tampa, Team 16-3, Watkins Winter 2015 



                    USFT-WATKINS-W15S16G3                     


                                            4 Members                     


                                            5 Guides authored                     

Chris - Dec 16, 2018

Reply

I have one question.. does the laptop operate without the battery? I want to take it out and not replace it.. thanks for your time..Chris

Ruben Guardado - Dec 12, 2020

If you have a computer connected to a power supply that will still allow it to work.