Samsung Series 9 Np900X4D A03Us Display Replacement Repair Guide

Difficulty

Moderate

Steps

7

Time Required

                          20 - 30 minutes            

Sections

2

• Battery
• 3 steps
• Display
• 4 steps

Flags

0

• BackSamsung Series 9 NP900X4D-A03US

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Use the screwdriver to remove the ten 2.5mm Phillips #00 screws.
• Use an iFixit opening tool to carefully remove the back panel from the laptop.

Use the screwdriver to remove the ten 2.5mm Phillips #00 screws.

Use an iFixit opening tool to carefully remove the back panel from the laptop.

1024

Step 2

• Remove the seven 0.5 mm Phillips #00 screws.

Remove the seven 0.5 mm Phillips #00 screws.

Step 3

• Lightly place some pressure into the highlighted cavity on the battery’s outlet plug with a spudger.
• Carefully remove the wires from the outlet plug.
• Now you will be able to remove the battery from its place.

Lightly place some pressure into the highlighted cavity on the battery’s outlet plug with a spudger.

Carefully remove the wires from the outlet plug.

Now you will be able to remove the battery from its place.

Step 4

              Display               

• Using tweezers, gently remove the adhesive surrounding the cover. At the same time, gently pry the cover off of the display using an iFixit opening tool.
• Gently place the cover to the left, as a wire is still attached.

Using tweezers, gently remove the adhesive surrounding the cover. At the same time, gently pry the cover off of the display using an iFixit opening tool.

Gently place the cover to the left, as a wire is still attached.

Step 5

• Use the Phillips #00 screwdriver to unscrew the four 2.5mm screws.
• Gently remove the tabs from each corner.

Use the Phillips #00 screwdriver to unscrew the four 2.5mm screws.

Gently remove the tabs from each corner.

Step 6

• Use the iFixit opening tool to detach the screen from the frame.
• Slowly lay the screen down on the keyboard.
• Be careful not to lift or tug on the display since a wire is still connected.

Use the iFixit opening tool to detach the screen from the frame.

Slowly lay the screen down on the keyboard.

Be careful not to lift or tug on the display since a wire is still connected.

Step 7

• Using tweezers, slowly remove the connected wire from the display.
• Gently remove the display from the device.

Using tweezers, slowly remove the connected wire from the display.

Gently remove the display from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 2 other contributors 

                    John                     

Member since: 04/22/2019

139 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Rixongile Mathebula - Jul 30, 2020

Reply

Good day

Where can I buy the screen?

My laptop model number is NP900X4D-A01ZA

Your assistance will be highly appreciated

Kind regards

adolph sibomana - Aug 25, 2020

is not easy to get that screen i think it needs a special screen