Difficulty
Easy
Steps
4
Time Required
10 minutes
Sections
2
- Battery
- 3 steps
- RAM
- 1 step
Flags
0
BackSamsung Series 9 NP900X4D-A03US
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Use the screwdriver to remove the ten 2.5mm Phillips #00 screws.
- Use an iFixit opening tool to carefully remove the back panel from the laptop.
Use the screwdriver to remove the ten 2.5mm Phillips #00 screws.
Use an iFixit opening tool to carefully remove the back panel from the laptop.
1024
Step 2
- Remove the seven 0.5 mm Phillips #00 screws.
Remove the seven 0.5 mm Phillips #00 screws.
Step 3
- Lightly place some pressure into the highlighted cavity on the battery’s outlet plug with a spudger.
- Carefully remove the wires from the outlet plug.
- Now you will be able to remove the battery from its place.
Lightly place some pressure into the highlighted cavity on the battery’s outlet plug with a spudger.
Carefully remove the wires from the outlet plug.
Now you will be able to remove the battery from its place.
Step 4
RAM
- Move aside the two metal retaining clips.
- Pull the RAM stick out to remove it.
Move aside the two metal retaining clips.
Pull the RAM stick out to remove it.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Aimee Young
Member since: 04/22/2019
293 Reputation
2 Guides authored
Badges:
6
+3 more badges
Team
UW Tacoma, Team S1-G4, Cardinal Spring 2019
Member of UW Tacoma, Team S1-G4, Cardinal Spring 2019
UWT-CARDINAL-S19S1G4
3 Members
3 Guides authored