Difficulty

Moderate

Steps

7

Time Required

                          15 - 30 minutes

Sections

1

  • Camera
  • 7 steps

Flags

2

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

Missing Prerequisites

This guide is missing information on how to start the process. Make a prerequisite guide!

  • BackSamsung SGH-E317

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

You will need a wedge shaped tool in order to pry open the front panel of cell phone and a screwdriver.

What you need

Step 1

              Camera
  • Remove the plastic coverings at the base of the LCD screen using your fingers.

Remove the plastic coverings at the base of the LCD screen using your fingers.

1024

Step 2

  • Remove the two 4.5mm screws located underneath the plastic coverings.
  • You may want to use tweezers to remove the loosened screws.

Remove the two 4.5mm screws located underneath the plastic coverings.

You may want to use tweezers to remove the loosened screws.

Step 3

  • Wedge the plastic opening tool under the crevice on the inner surface of the phone screen.
  • Gently pry the top panel off around the entire frame.

Wedge the plastic opening tool under the crevice on the inner surface of the phone screen.

Gently pry the top panel off around the entire frame.

Step 4

  • Make sure that the top panel is completely separated from the LCD display around the entire perimeter.

Make sure that the top panel is completely separated from the LCD display around the entire perimeter.

Step 5

  • Remove the top panel.

Remove the top panel.

Step 6

  • Detach the connecting wire panel from the LCD display system.

Detach the connecting wire panel from the LCD display system.

Step 7

  • Using tweezers, remove the camera from the cellphone casing.

Using tweezers, remove the camera from the cellphone casing.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 


                    Michael Strange

Member since: 01/30/2011

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       Cal Poly, Team 11-23, Maness Winter 2011                        

                                                  Member of Cal Poly, Team 11-23, Maness Winter 2011 



                    CPSU-MANESS-W11S11G23                     


                                            4 Members                     


                                            10 Guides authored