Samsung Smartcam Hd Pro Speaker Replacement Repair Guide

Difficulty

Moderate

Steps

8

Time Required

                          5 minutes            

Sections

2

• Casing
• 5 steps
• Speaker
• 3 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

• BackSamsung SmartCam HD Pro

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Casing               

• Locate a small opening around the front panel of the camera.

Locate a small opening around the front panel of the camera.

1024

Step 2

• Using a plastic opening tool, apply pressure to various points around the camera to pry open the front panel.

Using a plastic opening tool, apply pressure to various points around the camera to pry open the front panel.

Step 3

• Remove both of the connecting wires from the motherboard.
• Be careful to not bend headers or damage the wires.

Remove both of the connecting wires from the motherboard.

Be careful to not bend headers or damage the wires.

Step 4

• Apply a plastic opening tool to the gray plastic band around the case of the camera. Insert the edge of the spudger between the case of the camera and the gray plastic band.

Apply a plastic opening tool to the gray plastic band around the case of the camera. Insert the edge of the spudger between the case of the camera and the gray plastic band.

Step 5

• Apply pressure with the plastic opening tool to various areas of the gray plastic band to pry it from the white plastic back of the case.

Apply pressure with the plastic opening tool to various areas of the gray plastic band to pry it from the white plastic back of the case.

Step 6

              Speaker               

• Insert plastic opening tool below the plastic speaker cover on the inside of the removed front panel of the device.

Insert plastic opening tool below the plastic speaker cover on the inside of the removed front panel of the device.

Step 7

• Push the two tabs holding the speaker cover on, while prying it up.

Push the two tabs holding the speaker cover on, while prying it up.

Step 8

• Pull out the speaker which is now loosely resting in its plastic housing.

Pull out the speaker which is now loosely resting in its plastic housing.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    AllisonBridges                     

Member since: 01/18/2017

501 Reputation

                                      5 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       Arkansas State University, Team 1-1, Chamberlain Spring 2017                        

                                                  Member of Arkansas State University, Team 1-1, Chamberlain Spring 2017 



                    ARSU-CHAMBERLAIN-S17S1G1                     


                                            4 Members                     


                                            12 Guides authored