Samsung Sph A500 Logic Board Replacement Repair Guide

Difficulty

Moderate

Steps

8

Time Required

                          15 minutes            

Sections

1

• Logic Board
• 8 steps

Flags

Missed a Step

Oops! This guide is currently missing some important steps.

• BackSamsung SPH-A500

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Logic Board               

• Turn phone over
• Push the gray tab above the battery forward to remove the battery.

Turn phone over

Push the gray tab above the battery forward to remove the battery.

1024

Step 2

• Remove the battery from the phone, which will reveal four screws at the corners of the phone.

Remove the battery from the phone, which will reveal four screws at the corners of the phone.

Step 3

• Remove all four screws using a small Philips screwdriver.
• Note: The screws do not need to be completely removed from the case, as long as they are unscrewed.

Remove all four screws using a small Philips screwdriver.

Note: The screws do not need to be completely removed from the case, as long as they are unscrewed.

Step 4

• Remove back cover by carefully prying it open.
• Note: Some force may be required.

Remove back cover by carefully prying it open.

Note: Some force may be required.

Step 5

• Pull the side tabs outward while simultaneously lifting up the circuit board.
• Do not completely pull out the circuit board.

Pull the side tabs outward while simultaneously lifting up the circuit board.

Do not completely pull out the circuit board.

Step 6

• Look for the clip at the top right corner of the logic board.

Look for the clip at the top right corner of the logic board.

Step 7

• Remove the clip from the logic board.

Remove the clip from the logic board.

Step 8

• Remove the logic board.
• Replace the broken logic board with a new one.

Remove the logic board.

Replace the broken logic board with a new one.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 2 other contributors 

                    Nick Dominikovic                     

Member since: 04/13/2010

139 Reputation

                                      4 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       Cal Poly, Team 18-100, Johann Spring 2010                        

                                                  Member of Cal Poly, Team 18-100, Johann Spring 2010 



                    CPSU-JOHANN-S10S18G100                     


                                            4 Members                     


                                            10 Guides authored