Samsung Sph A500 Speaker Replacement Repair Guide

Difficulty

Moderate

Steps

7

Time Required

                          20 minutes            

Sections

1

• Speaker
• 7 steps

Flags

2

Missing Prerequisites

This guide is missing information on how to start the process. Make a prerequisite guide!

Missed a Step

Oops! This guide is currently missing some important steps.

• BackSamsung SPH-A500

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Speaker               

• Flip open the phone, remove the two rubber covers under the LCD screen.
• Remove the two screws using a small Philips screwdriver.

Flip open the phone, remove the two rubber covers under the LCD screen.

Remove the two screws using a small Philips screwdriver.

1024

Step 2

• Using an Ipod opening tool or your finger nails, pry open the back cover of the LCD screen.
• Note: Some force may be required.

Using an Ipod opening tool or your finger nails, pry open the back cover of the LCD screen.

Note: Some force may be required.

Step 3

• Completely separate the back cover from the rest of the phone.
• Close the phone.

Completely separate the back cover from the rest of the phone.

Close the phone.

Step 4

• The speaker is covered with silver tape on the bottom of the logic board.

The speaker is covered with silver tape on the bottom of the logic board.

Step 5

• Remove the silver tape that is covering the speaker.

Remove the silver tape that is covering the speaker.

Step 6

• Remove the speaker.
• Note: In order to completely remove the speaker you must disconnect the wires, which will require a soldering iron to reattach the new speaker.

Remove the speaker.

Note: In order to completely remove the speaker you must disconnect the wires, which will require a soldering iron to reattach the new speaker.

Step 7

• Attach the new speaker using a soldering iron.
• Put the speaker back to it’s original position and place the silver tape over it.

Attach the new speaker using a soldering iron.

Put the speaker back to it’s original position and place the silver tape over it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 4 other contributors 

                    Nick Dominikovic                     

Member since: 04/13/2010

139 Reputation

                                      4 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       Cal Poly, Team 18-100, Johann Spring 2010                        

                                                  Member of Cal Poly, Team 18-100, Johann Spring 2010 



                    CPSU-JOHANN-S10S18G100                     


                                            4 Members                     


                                            10 Guides authored