Difficulty

Moderate

Steps

8

Time Required

                          20 - 30 minutes

Sections

2

  • Outer Casing
  • 4 steps
  • Rear Panel Control Board
  • 4 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackSamsung ST150F

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Outer Casing
  • Remove these screws from the camera using a phillips head screwdriver.

Remove these screws from the camera using a phillips head screwdriver.

1024

Step 2

  • Lay the camera down on the table and remove the metal shell from the front.

Lay the camera down on the table and remove the metal shell from the front.

Step 3

  • Wedge a spudger/flathead screwdriver inside of the shell where the screws were to pry the shell off of the back.

Wedge a spudger/flathead screwdriver inside of the shell where the screws were to pry the shell off of the back.

Step 4

  • Remove the shell the from the back of the camera.

Remove the shell the from the back of the camera.

Step 5

              Rear Panel Control Board
  • Remove the Phillips head screw from the rear panel control board to reveal the LCD’s connection to the motherboard.

Remove the Phillips head screw from the rear panel control board to reveal the LCD’s connection to the motherboard.

Step 6

  • Remove the Phillips head screws from the metal back plate.

Remove the Phillips head screws from the metal back plate.

Step 7

  • Use the spudger to life the tab on the side of the metal plate.

Use the spudger to life the tab on the side of the metal plate.

Step 8

  • Pull gently on the control panel to remove it from the motherboard.

Pull gently on the control panel to remove it from the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors 


                    Matthew Eaton

Member since: 03/29/2015

107 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       UMass Dartmouth, Team 2-1, Shastany Spring 2015                        

                                                  Member of UMass Dartmouth, Team 2-1, Shastany Spring 2015 



                    UMASSD-SHASTANY-S15S2G1                     


                                            4 Members                     


                                            8 Guides authored