Samsung Sway Motherboard Replacement Repair Guide

Difficulty

Moderate

Steps

8

Time Required

Suggest a time??

Sections

1

• Motherboard
• 8 steps

Flags

2

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Better Introduction

Improve this guide by completing or revising its introduction.

• BackSamsung Sway

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Motherboard               

• Using your thumb(s) slide the cover up to remove
• Remove the battery by using your finger either in the upper left or right corner

Using your thumb(s) slide the cover up to remove

Remove the battery by using your finger either in the upper left or right corner

1024

Step 2

• Unscrew the four corner .4cm Phillips head screws.

Unscrew the four corner .4cm Phillips head screws.

Step 3

• Using a pair of tweezers gently insert them under the Samsung logo on the bottom of the phone.

Using a pair of tweezers gently insert them under the Samsung logo on the bottom of the phone.

Step 4

• Unscrew the two .4 cm Phillips head screws from under the Samsung logo

Unscrew the two .4 cm Phillips head screws from under the Samsung logo

Step 5

• Using the plastic opening tool gently insert it into the seam and work it around till the cover comes off. Being careful of the side buttons that pop off.

Using the plastic opening tool gently insert it into the seam and work it around till the cover comes off. Being careful of the side buttons that pop off.

Step 6

• Grasp the sides of the motherboard and gently rock back and forth . This is due to the sticky tape that is on the battery

Grasp the sides of the motherboard and gently rock back and forth . This is due to the sticky tape that is on the battery

Step 7

• Disconnect the black serial cable from the mother board.

Disconnect the black serial cable from the mother board.

Step 8

• Gently pull of the antenna sticker tape.

Gently pull of the antenna sticker tape.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 3 other contributors 

                    Chris Rush                     

Member since: 06/27/2013

306 Reputation

                                      3 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       WRI115, Team 1-2, Ruszkiewicz Spring 2013                        

                                                  Member of WRI115, Team 1-2, Ruszkiewicz Spring 2013 



                    WRI115-RUSZKIEWICZ-S13S1G2                     


                                            4 Members                     


                                            6 Guides authored