Difficulty
Moderate
Steps
7
Time Required
10 - 15 minutes
Sections
2
- Battery
- 2 steps
- Pad Buttons
- 5 steps
Flags
0
BackSamsung T139
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Remove Back Cover
- Power off your phone before beginning disassembly
- Apply pressure to the back cover and slide towards the base
Power off your phone before beginning disassembly
Apply pressure to the back cover and slide towards the base
1024
Step 2
Remove Battery
- With a plastic opening tool, lift and remove the battery
With a plastic opening tool, lift and remove the battery
Step 3
Remove Screws
- Remove the four Phillips 1.0mm #0 screws
Remove the four Phillips 1.0mm #0 screws
Step 4
Remove Black Plastic Cover
- Using the plastic opening tool, work around the edge of the black plastic cover until it pops off
Using the plastic opening tool, work around the edge of the black plastic cover until it pops off
Step 5
Remove Side Buttons
- Remove side buttons by lifting them off the board
Remove side buttons by lifting them off the board
Step 6
Remove Circuit Board
- Lift circuit board up gently
- Be careful to not pull ribbon cord apart when removing
Lift circuit board up gently
Be careful to not pull ribbon cord apart when removing
Step 7
Remove Button Pad
- Lift away button pad
Lift away button pad
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Reagan May
Member since: 10/23/2014
573 Reputation
5 Guides authored
Badges:
12
+9 more badges
Team
Michigan Tech, Team 1-1, Lauer Fall 2014
Member of Michigan Tech, Team 1-1, Lauer Fall 2014
MTU-LAUER-F14S1G1
3 Members
9 Guides authored
