Difficulty

Moderate

Steps

4

Time Required

Suggest a time??

Sections

1

  • Display
  • 4 steps

Flags

2

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackSamsung Tab S5e WiFi - LTE

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Step 1

              Turn device off
  • Turn the device off before starting any repairs

Turn the device off before starting any repairs

1024

Step 2

              Loosening display from frame
  • Use a heat gun or similar tool to heat around the edge of the glass.
  • Use a suction cup to lift the glass up and insert a opening tool in between the glass and frame:
  • Work around the glass to loosen the adhesive securing the glass.
  • Take care when sliding the tool in front of the camera, there is also alight sensor that is hidden underneath the glass

Use a heat gun or similar tool to heat around the edge of the glass.

Use a suction cup to lift the glass up and insert a opening tool in between the glass and frame:

Work around the glass to loosen the adhesive securing the glass.

Take care when sliding the tool in front of the camera, there is also alight sensor that is hidden underneath the glass

Step 3

              Removing the adhesive strips
  • It may be possibel to pull the adhesive strip out from the glass.

It may be possibel to pull the adhesive strip out from the glass.

Step 4

              Display removal
  • Carefully lift the display up from the right side to expose the cables underneath.
  • The display cable can be seen as marked in the red box.
  • Disconnect the cable and remvoe the old display.
  • Clean any remaining glass or adhesive from the frame.
  • To replace the display follow the steps in reverse order. Test the display before securing it to the frame.

Carefully lift the display up from the right side to expose the cables underneath.

The display cable can be seen as marked in the red box.

Disconnect the cable and remvoe the old display.

Clean any remaining glass or adhesive from the frame.

To replace the display follow the steps in reverse order. Test the display before securing it to the frame.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.

Author

                                      with 1 other contributor 


                    Harvey

Member since: 02/15/2016

4,602 Reputation

                                      10 Guides authored                  



                       Badges:
                       15







                                                        +12 more badges