Difficulty

Moderate

Steps

12

Time Required

                          5 minutes

Sections

5

  • The Back Cover
  • 3 steps
  • The Battery
  • 2 steps
  • Disassembling Samsung TFT Color YP-T7J USB Connector Dock
  • 1 step
  • The Front Cover
  • 4 steps
  • Front Cover Button
  • 2 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackSamsung TFT Color YP-T7J Device Page

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              The Back Cover
  • Remove the 2 screws on the back cover using a Phillips head #0 screwdriver.

Remove the 2 screws on the back cover using a Phillips head #0 screwdriver.

1024

Step 2

  • Remove the screw on each side of the device using a Phillips head screwdriver.

Remove the screw on each side of the device using a Phillips head screwdriver.

Step 3

  • Using the plastic opening kit, place the prying end of the kit into the opening created by removing the screws.
  • Gently pry open the back cover. Insert the plastic opening tool in between the cover joints.

Using the plastic opening kit, place the prying end of the kit into the opening created by removing the screws.

Gently pry open the back cover. Insert the plastic opening tool in between the cover joints.

Step 4

              The Battery
  • Once the back cover has been removed the battery will be visible.
  • Pry the battery from the device.
  • NOTE: The battery should still be connected to the device

Once the back cover has been removed the battery will be visible.

Pry the battery from the device.

NOTE: The battery should still be connected to the device

Step 5

  • Unplug the battery connecting cables.
  • NOTE: The battery now should be free from all connections to the device.

Unplug the battery connecting cables.

NOTE: The battery now should be free from all connections to the device.

Step 6

              Disassembling Samsung TFT Color YP-T7J USB Connector Dock
  • Once the battery has been removed you can see the motherboard.
  • Unscrew 4 screws on the metal docket using a Phillips head screw driver.
  • The USB connector can now be taken off of the device.

Once the battery has been removed you can see the motherboard.

Unscrew 4 screws on the metal docket using a Phillips head screw driver.

The USB connector can now be taken off of the device.

Step 7

              The Front Cover
  • Using the philips screwdriver, remove the two screws on the mother board.

Using the philips screwdriver, remove the two screws on the mother board.

Step 8

  • Place the pry tool in-between the front cover and mother board.
  • Gently separate the front cover.

Place the pry tool in-between the front cover and mother board.

Gently separate the front cover.

Step 9

  • After opening the front cover you will see and electric ribbon connecting the buttons to the mother board.

After opening the front cover you will see and electric ribbon connecting the buttons to the mother board.

Step 10

  • CAUTION: Do not rip the electric ribbon from the mother board.
  • Carefully flip up the plastic lip that holds the electric ribbon to the board.

CAUTION: Do not rip the electric ribbon from the mother board.

Carefully flip up the plastic lip that holds the electric ribbon to the board.

Step 11

              Front Cover Button
  • Once the front cover is separated from the device, locate the four screws in the metal plate.
  • Using the small phillips screw driver, remove the four screws.
  • Remove the metal cover.

Once the front cover is separated from the device, locate the four screws in the metal plate.

Using the small phillips screw driver, remove the four screws.

Remove the metal cover.

Step 12

  • Remove the rubber button pad.

Remove the rubber button pad.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 4 other contributors 


                    Jason Farr

Member since: 10/21/2013

353 Reputation

                                      3 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       Clemson, Team 14-8, Benson Fall 2013                        

                                                  Member of Clemson, Team 14-8, Benson Fall 2013 



                    CLEM-BENSON-F13S14G8                     


                                            3 Members                     


                                            7 Guides authored